+86 0571-87007056  service@fctel.com.cn

Serial Optical Fiber Modem

RS232/422/485 Fiber Modem(Desktop Tpye)

This device is based on FPGA which supports asynchronous RS-232/422/485 communication interface Fiber Modem. The device is the best choice of connecting to the remote terminal unit (RTU) to a host (HOST) or a distributed data acquisition system (SCADA) controllers with very high performance price ratio. Using ordinary multi-mode fiber effective communication distance is up to 4KM while using ordinary single-mode fiber effective communication distance up to more than 40KM. Serial port communication rate is up to 921.6KBPS. As a result of the fiber as a transmission medium you can completely avoid the threat to communication device under the adverse environment such as lightning surges and electromagnetic interference at the same time it saves investments of the original lightning surge protection devices that using copper.
◆ based on self -copyright IC; 
◆ Support 3 interfaces RS232RS422RS485 you can only use one cannot use the three interfaces at the  same time;
◆ Can automatically detect and control RS485 data flow without handshake signals to control the flow direction  of data
◆ Have the ability to automatically detect the baud rate of serial port signal;
◆ Automatically test the reason of the device matt is that the device is power off or E1 line is broken. And then indicate on the LED;
◆ Support SNMP Network Management;
◆ Serial channel can transmit adaptable serial data asynchronously 300 Kbps-921.6Kbps baud rate; 
◆ Serial port interface lightning-protection reached IEC61000-4-5 (8/20μS) DM(Differential Mode): 6KV Impedance (2 Ohm) CM(Common Mode): 6KV Impedance (2 Ohm) standard.
Multi-mode Fiber
50/125um 62.5/125um
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber attenuation (3dbm/km)Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
link budget: 16dBm
Single-mode Fiber
8/125um 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9 / 125um single mode fiber attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
link budget: 18dBm
Serial interface 
EIA/TIA-232 RS-232 (ITU-T V.28)
EIA/TIA-422 RS-422 (ITU-T V.11)
EIA/TIA-485 RS-485 (ISO/IEC8284)
Serial Interface
RS-422: TXD+ TXD- RXD+ RXD- Signal Ground
RS-485 4 wires: TXD+ TXD- RXD+ RXD- Signal Ground
RS-485 2 wires: Data+(Correspond TX+) Data-(Correspond TX-) Signal Ground
RS-232: RXD TXD Signal Ground
Power supply: AC180V ~ 260V;DC –48V;DC +24V
Power consumption: ≤10W
Product Size: 103X93X28mm(WXDXH)                
Simple packaging: 200X176X55mm(WXDXH)
Piece Weight : 1.2KG
Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
RS232/422/485 Fiber Modem(Desktop Tpye)