+86 0571-87007056  service@fctel.com.cn

E1/V.35/V.24 Over IP

1*V.24 over ethernet(IP)

Overview
TDMoverIP equipment is mainly used for transmitting V.24 signal over IP network. Enables operators and enterprises to seamlessly and reliably connect TDM devices and user Ethernet on a standard low-cost wireless or wired Ethernet / IP structure but no impact on quality. TDM over IP transparent to TDM signals ensures that any device with a physical V.24 interface is seamlessly connected such as the PBX mobile station SS7 signaling device and voice mail system. Can be used in IP-based communication systems such as: LAN WAN MAN and wireless networks.
With 1 V.24 port 2 FE electrical port 1 FE optical port 1 Console Management Interface.
Features
◆ provide Console (CLI) and WEB management interface convenient for installation;
◆ Provide a V.24 circuit two Fast Ethernet electrical port a Fast Ethernet SFP optical port;
◆ Transparent transmission of V.24 signals over IP network complies with the relevant provisions of ITU-T V.24
◆ clock recovery using a unique clock algorithm stable frequency slight jitter and drift ;
◆ Provides three kinds of loopback function: Ethernet local loopback (ANA) V.24 local loopback (DIG) V.24 remote loopback(REM);
◆ Pseudo-random code test function easy to open the circuit can be used as a 2M BER tester to use
◆ V.24 interface supports hot swap; support and DTE or DCE device interconnection
◆ V.24 working clock can support the internal clock external clock line clock;
◆ High transmission efficiency low transmission delay; Ethernet packet length can be set to support long packets; Support VLAN settings;
◆ support V.24 link packet loss indication function;
◆ high transmission efficiency up to 90% bandwidth utilization efficiency;
◆ Support WEB network management software and hardware online upgrade locally and remotely;
◆ a variety of power options: AC220V DC-48V / DC24V etc.
Parameters
E1 Interface
Interface Standard: comply with protocol G.703;
Interface Rate:  n*64Kbps±50ppm;
Interface Code:  HDB3;
E1 Impedance: 75Ω (unbalance) 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation:  0~6dBm
Ethernet interface (10/100M)
Interface rate: 10/100 Mbps half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45 support Auto-MDIX
Power
Power supply: AC180V ~ 260V;DC –48V;DC +24V
Power consumption: ≤10W
Dimension          
Product Size: Mini Type    216X140X31mm(WXDXH)
Simple packaging: 274X193X84mm(WXDXH)
Piece Weight : 1.25KG 
Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Application
1*V.24 over ethernet(IP)
Download

CONTACT US

Skype: tracy.fctel

Tel: +86 0571-87007056

Phone: +86 18966484617

Email: service@fctel.com.cn

Add: 7F,Building 2,NO.9 XiYuan 2nd Road,West Lake Technology Park, Hangzhou,China.