+86 0571-87007056  service@fctel.com.cn

E1/V.35/V.24 Over IP

  • fctel-
  • fctel-
  • fctel-

1*V.35 over ethernet(IP)

TDMoverIP equipment is mainly used for transmitting V.35 signal over IP network. Enables operators and enterprises to seamlessly and reliably connect TDM devices and user Ethernet on a standard low-cost wireless or wired Ethernet / IP structure but no impact on quality. TDM over IP transparent to TDM signals ensures that any device with a physical V.35 interface is seamlessly connected such as the PBX mobile station SS7 signaling device and voice mail system. Can be used in IP-based communication systems such as: LAN WAN MAN and wireless networks.
With 1 V.35 port 2 FE electrical port 1 FE optical port 1 Console Management Interface.
◆Provide Console (CLI) and WEB management interface convenient for installation;
◆ Provide a V.35 circuit two FE electrical port a FE SFP optical port;
Transparent transmission of V.35 signals over IP networks complies with ITU-T V.35 regulations
◆ clock recovery using a unique clock algorithm stable frequency slight jitter and drift;
◆ Provides three kinds of loopback function: Ethernet local loopback (ANA) V.35 local loopback (DIG) V.35 remote loopback (REM);
◆ Pseudo-random code test function easy to open the circuit can be used as a 2M BER tester to use
◆ V.35 interface supports hot swap; support and DTE or DCE device interconnection
◆ V.35 working clock can support the internal clock external clock line clock;
◆ High transmission efficiency low transmission delay; Ethernet packet length can be set to support long packets; Support VLAN settings;
◆ support V.35 link packet loss indication function;
◆ high transmission efficiency up to 90% bandwidth utilization efficiency;
◆ Support WEB network management software and hardware online upgrade locally and remotely;
◆ a variety of power options: AC220V DC-48V / DC24V etc.
E1 Interface
Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;
E1 Impedance: 75Ω (unbalance) 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation:  0~6dBm
Ethernet interface (10/100M)
Interface rate: 10/100 Mbps half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45 support Auto-MDIX
Power supply: AC180V ~ 260V;DC –48V;DC +24V
Power consumption: ≤10W
Product Size: Mini Type    216X140X31mm(WXDXH)
Simple packaging:   274X193X84mm(WXDXH)
Piece Weight : 1.25KG 
Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity:  5%~95 % (no condensation)
1*V.35 over ethernet(IP)


Skype: tracy.fctel

Tel: +86 0571-87007056

Phone: +86 18966484617

Email: service@fctel.com.cn

Add: 7F,Building 2,NO.9 XiYuan 2nd Road,West Lake Technology Park, Hangzhou,China.