+86 0571-87007056  service@fctel.com.cn

Voice Over Fiber

4FXO/FXS+4FE+2RS232/RS422/RS485 Fiber Mux (Desktop Type)

Overview
The Equipment supports 4 Ethernet port+4*Voice+ 2*RS232/422/485/ or 4*Dry contact  interface to the optical fiber converter to achieve network + telephone + serial data + Dry contact 4 type interface in the same core Optical fiber transmission is widely used in a variety of industrial control card instrumentation and other occasions not only save fiber resources but also save fiber equipment reduce the point of failure to facilitate the maintenance of equipment.
Features
◆ Equipment to provide 4*100M FE port; 4*voice interface 2*serial data interface / 4*dry contact;
◆ Voice port support FXO/FXS/2 Wire Audio/Magnet phone interface FXO port plug into PBX  FXS port is connected to the user’s telephone;
◆ FXO/FXS telephone interface support caller ID / reverse polarity billing / fax function;
◆ Both sides of the device support FXO+FXS hybrid access;
◆ RS232/RS485/RS422/TTL/Dry contact transmission channel flexible application;
◆ Serial interface can be transmitted asynchronously from 300-115200 baud rate adaptive serial data;
◆ 4*FE bandwidth is wire speed 100M automatically adapt to 10/100Mbps environment easy to upgrade the network;
◆ Ethernet interface supports full-duplex and half-duplex network communication with auto-negotiation capability MDI / MDI-X adaptive without manual adjustment;
◆ A variety of power options: AC220V DC-48V / DC24V;
◆ Telephone/Ethernet/serial-data interface with lightning protection lightning protection to IEC61000-4-5 short-circuit current wave 10/700μs open peak output voltage 6KV standard.
Parameters
Fiber
Multi-mode Fiber
50/125um 62.5/125um
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber attenuation (3dbm/km)Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
link budget: 16dBm
Single-mode Fiber
8/125um 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9 / 125um single mode fiber attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
link budget: 18dBm
Ethernet interface(10/100M)
Interface rate: 10/100 Mbps half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector:RJ45 support Auto-MDIX
FXS Phone Interface
Ring voltage: 75V
Ring frequency: 25HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
FXO Switch Interface
Ring detect voltage: 35V
Ring detection frequency:    17HZ-60HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
EM 2/4 Line
AD: 0dB
DA: -3.5dB
Two/Four-line Impedance:  600 Ohm
Return loss: 20 dB
Working environment
Working temperature:    -10°C ~ 50°C
Working Humidity:  5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Application
4FXO/FXS+4FE+2RS232/RS422/RS485 Fiber Mux
Download

CONTACT US

Skype: tracy.fctel

Tel: +86 0571-87007056

Phone: +86 18966484617

Email: service@fctel.com.cn

Add: 7F,Building 2,NO.9 XiYuan 2nd Road,West Lake Technology Park, Hangzhou,China.