Adam module Industrial rail 1-4 channel 4-20mA analog optical transceiver

Short Description:

Model:FCP-A4G

    This series of devices adopt large-scale FPGA design and original technology, and can support 1-4 channel analog signal (current/voltage) to optical fiber relay at the same time. The device is powered by 12-55V AC or DC power supply, high performance FPGA programmable devices, no MCU processing, high-speed conversion, sampling frequency can reach 20KHZ, 12-bit AD conversion chip, which solves the problems of electromagnetic interference, ground loop interference and lightning damage, greatly improving the problem. Control signal reliability, security and confidentiality, and also solve the problem of limited cable transmission distance. 


  • FOB Price: US $1 - 600 / Piece
  • Min.Order Quantity: 1 Piece/1 Pair
  • Supply Ability: 2000 Piece/Pieces per Month
  • Port: Shanghai
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    Product Tags

    feature

    The device is paired, the local signal input, and the opposite signal output; Ø

    Support 4~20mA, 1-4 way current; or support 0~10V/0~5V, 1-4 way voltage; 4 channels of analog input and output can be combined arbitrarily;

    4-channel analog AD/DA channel uses FPGA parallel read and write, non-MCU sequential read and write mode, each channel analog delay <0.1ms;

    Each analog quantity reads high-speed sampling data through FPGA, and the sampling rate is 20K times/second, which is much higher than similar products in the market;

    Multimode fiber/single mode fiber is optional, multimode can transmit 2KM, single mode can transmit 20KM, ST/SC/FC interface is optional;

    Signal failure protection function; display of electrical interface and fiber running status in all directions

    4-20ma interface anti-radar to IEC61000-4-5 (8/20μS) differential mode: 6KV, impedance (2Ω); common mode: 6KV, impedance (2Ω) standard

    Support wide range of AC and DC input, support internal isolation, redundant dual power input, power supply overload protection, anti-reverse protection

    Super lightning protection function: lightning protection, anti-induction high voltage, anti-surge, etc.;

    No fan to efficiently dissipate heat and reduce repair time;

    Provide DIN 35mm rail mounting or wall mounting mounting.

    Wide temperature type: working temperature -40 ° C ~ +85 ° C;

    All models are tested by 100% baking machine;

    par

    Fiber

    Optical port: 1

    Optical fiber: single fiber and double fiber

    Fiber Interface: FC/SC/ST/LC (SFP)

    Wavelength: 850nm/1310nm multimode; 1310nm/1550nm single mode

    No relay transmission distance: 20~120Km

    Typical transmit power:

    Single mode 1310/1550nm: -9dBm

    Multimode 850nm: -18dBm

    Multimode 1310nm: -25dBm

    Acceptable sensitivity range: -28dBm~- 40dBm

    Current analog

    Input and output range: 0~20mA (including 4~20mA)

    Resolution: 12 digits

    Sampling rate: 20K times / sec

    Time delay: <0.1ms

    Maximum load capacity: 600Ω

    Input resistance: 125Ω

    Accuracy: 0.4% (normal temperature)

    Voltage analog

    Input and output range: 0~10V (including 0~5V)

    Resolution: 12 digits

    Sampling rate: 20K times / sec

    Time delay: <1ms

    Maximum load capacity: 600Ω

    Input resistance: 100ΚΩ

    Accuracy: 0.4% (normal temperature)

    Working environment

    Working temperature: -40 ° C – +85 ° C

    Storage temperature: -40 ° C – +85 ° C

    Working humidity: 0% – 95% (no condensation)

    MTBF: >100,000 hours

    spe

    Product number FCP-A4G
    Product function description Simultaneous transmission of 4 analog interfaces on the fiber
    Service port description 1 fiber interface; 16 analog interfaces
    Power supply

     power input: AC&DC12-55V power consumption <5W overload protection: support; reverse connection protection: support; redundancy protection: support

    Shell: Adam moudle shell

    Installation method: rail mounting, wall mounting

     Product Size Dimensions: 72mm (length) x 125mm (width) x 26.0mm (height)
     weight  0.35kg/set

    application

    搜狗截图20190702130844

     

    Download Datasheet:

    Adam module Industrial rail 1-4 channel 4-20mA

     

     







  • Previous:
  • Next:

  • Subscribe To Our Newsletter

    For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

    Follow Us

    on our social media
    • sns04
    • sns05
    • sns01
    • sns02
    • sns03
    WhatsApp Online Chat !