1-2 channel RS232 / RS485 / RS422 Fiber Modem (Mini)

    This device is based on FPGA, which supports asynchronous RS232/RS485/RS422 communication interface Fiber Modem. The device is the best choice of connecting to the remote terminal unit (RTU) to a host (HOST) or a distributed data acquisition system (SCADA) controllers, with very high performance price ratio. Using ordinary multi-mode fiber, effective communication distance is up to 4KM, while using ordinary single-mode fiber, effective communication distance up to more than 40KM. Serial port communication rate is up to 921.6KBPS. As a result of the fiber as a transmission medium, you can completely avoid the threat to communication device under the adverse environment, such as lightning, surges and electromagnetic interference, at the same time it saves investments of the original lightning surge protection devices that using copper .

◆ Based on self -copyright IC 
◆ Have the ability to automatically detect the baud rate of serial port signal
◆ Automatically test the reason of the device when the device is power off or fiber line is broken. And then  indicate on the LED
◆ Serial port interface lightning-protection reached IEC61000-4-5 (8/20μS) DM(Differential Mode): 6KV,  
◆ Impedance (2 Ohm), CM(Common Mode): 6KV, Impedance (2 Ohm) standard Support SNMP Network Management
◆ Serial channel can transmit adaptable serial data asynchronously 300-921.6Kbps baud rate

◆Fiber

Gidaghanon sa mga Fiber Ports: 1

Optical wavelength:

850nm / 1310nm alang sa multi- mode optical

1310nm / 1550nm alang sa single-mode optical interface

Fiber Core: Single / Duha fiber core

Connector: FC / SC / ST / LC (SFP)

Gilay-on: 20km-120km

Sagad nga output sa gahum:

single mode 1310 / 1550nm:> -9dBm

multi-mode 850nm:> - 18dBm

multi-mode 1310nm:> - 25dBm

nga Tigdawat Sensitivity: -28dBm ~ - 40dBm

◆Serial interface 

   Standard

EIA / Tia-232 RS-232 (Itu-T V.28)

EIA / Tia-422 RS-422 (Itu-T V.11)

EIA / Tia-485 RS-485 (ISO / IEC8284)

   Serial Interface

RS-422: TXD +, TXD-, RXD +, RXD-, Signal Ground

RS-485 4 alambre: TXD +, TXD-, RXD +, RXD-, Signal Ground

RS-485 2 alambre: Data + (katumbas TX +), Data- (katumbas TX-), Signal Ground

RS-232: RXD, TXD, Signal Ground

◆Working environment

Ang pagtrabaho temperatura: -10 ° C ~ 50 ° C

Working humidity: 5% ~ 95% (walay pagpiit)

Pagtipig temperatura: -40 ° C ~ 80 ° C

Pagtipig humidity: 5% ~ 95% (walay pagpiit)