4 * E1 sobre Ethernet (IP) Tipo de escritorio - China Hangzhou FCTEL Tecnoloxía

4 * E1 sobre Ethernet (IP) tipo de sobremesa

Descrición curta:

TDMoIP-4E1 is mainly used to transmit voice signal over IP network. It has 2 interfaces for 4E1, 2 UTP Ethernet port and 1*fiber Ethernet port. TDMoIP-4E1 can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the voice quantity. 

    


  • FOB Precio: US $1 - 600 / Piece
  • Min.Order Cantidade: 1 Piece/1 Pair
  • Capacidade de subministración: 2000 Piece/Pieces per Month
  • Porto: Shanghai
  • Condicións de pagamento: G / A, D / A, D / P, T / T
  • Detalles do produto

    Etiquetas de produtos

    overview

    TDMoIP-4E1 is mainly used to transmit voice signal over IP network. It has 2 interface for 4E1, 2 UTP Ethernet port and 1*fiber Ethernet port. TDMoIP-4E1 can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the voice quantity. assures connecting to physical E1 interface of any device seamlessly, such as PBX, mobile base station, SS7 signaling device and voice mail system. It can be used in the communication system based on E1, such as LAN, WAN, MAN and wireless network.

         Providing emulation E1 channel through Ethernet, the difficulty is rebuilding timing information of E1 code stream effectively at the exit of network. The special disadvantages of Ethernet itself, such as random packet delay, without effective timing transmit mechanism, transmission error or collision that brings on packet lose, must be conquered. Our company resolves the difficulties above faultlessly through availing ourselves of technical advantage and adapting advanced clock disposal technology. TDMoIP-4E1 encapsulates the date of E1 code stream to the packet and transmits it to the remote device through Ethernet.

    feature

    ◆ Provide 1-4 E1 channels interface transparently, confirming to ITU-G.703.
    ◆ High transmit efficiency, low transmit delay.
    ◆ Provide 4*E1 channels and 2*10/100Base-TX and 1*100Base-FX interface.
    ◆ The length of Ethernet packet can be set, supporting huge packet.
    ◆ User can select IP protocol encapsulation or simplicity Ethernet type.
    ◆ Support VLAN setting.
    ◆ Support Ethernet ping function.
    ◆ Support package loss indicator function for E1 transmission line.
    ◆ Local and remote E1 loop and local E1 enable function.
    ◆ Point to point or point to multi-points connections, satisfying different applications.
    ◆ High efficiency transmission, up to 90% bandwidth utility ratio.
    ◆ Support two type interfaces-75Ω and 120Ω-unneed setting.
    ◆ 10/100M Ethernet, full/half duplex auto-adapt, support auto-MDIX.
    ◆ When selecting network adaptation clock, it can resume the original clock accurately through TDM clock resumption mechanism, stable clock, little jitter and small excursion, conforming to ITU-T clock jitter and excursion standard.
    ◆ The device Support WEB management platform, online software upgrades, the host side can manage the work of each state machine equipment;

    parameter

    interface de Ethernet (10 / 100m)

    taxa de Interface: 10/100 Mbps, half / auto-negociación full duplex

    Interface estándar: Compatible con IEEE 802.3, IEEE 802.1Q (VLAN)

    MAC Capability Dirección: 4096

    Conector: RJ45, soportan Auto-MDIX

    E1 interface

    Standard: conformidade coa normativa G.703

    taxa de código: 2.048Mbit / s ± 50ppm

    Tipo de código: HDB3        

    Impendence: 75Ω (desequilibrio) / 120 (equilibrio)

    Conector: BNC (desequilibrio) / RJ45 (saldo)

    Tolerancia do tremor: estar de acordo con G.742 e G.823  

    escritorio

    temperatura de traballo: -10 ° C ~ 50 ° C

    Humidade de traballo: 5% ~ 95% (sen condensación)

    temperatura de almacenamento: 40 ° C ~ 80 ° C

    Humidade de almacenamento: 5% ~ 95% (sen condensación)

    spe

    Modelo FCT-4E1
    descrición funcional 4 * E1 sobre Ethernet, AC220V Alimentación interna / DC48V / DC24V pode opcional
    poder Fonte de alimentación: AC180V ~ 260V; DC 48V; DC + 24V Consumo de enerxía: ≤10W
    dimensión 216X130X31mm (LxPxA)
    peso 1,3 kg

    aplicación

    4E1 sobre IP 应用 图

     

    Download Datasheet:

    4E1 over Ethernet( IP)


  • Anterior:
  • Seguinte:

  • Asine a nosa newsletter

    Para máis información sobre os nosos produtos ou lista de prezos, por favor, deixe o seu correo electrónico para nós e nós porémonos en contacto en 24 horas.

    Síguenos

    na nosa comunicación social
    • sns04
    • sns05
    • sns01
    • sns02
    • sns03
    WhatsApp Online Chat !