8 Ports 10/100M Ethernet POE Switch

This series of products realize 1-8 10/100Base-T twisted pair switching functions, 8 Ethernet ports provide IEEE802.3af/at power supply functions, and support wireless access points (AP) or IP phones and other services through Category 5 Ethernet cables power supply of the device.

● Automatically adapt to 10/100Mbps environment, easy to upgrade with different networks, supports full-duplex and half-duplex network communication, with automatic negotiation capability, electrical port MDI/MDI-X self-adaptation without manual adjustment, convenient for on-site wiring.

● The transceiver has functions such as crash monitoring and self-resetting, and can work for a long time without crashing in a large-flow video transmission environment, greatly reducing the workload of equipment maintenance,

● The transceiver has a built-in large-capacity and high-speed cache, which can avoid the frame burst caused by the frame burst of the IP camera in the environment where the monitoring picture changes rapidly such as the reflection of car lights on the road on rainy nights;

● Supports the transmission of VLAN ultra-long data packets, supports Ethernet packets with a maximum size of more than 2000 bytes, and is suitable for some jumbo frame network image transmission protocols;

● With the Ethernet loopback detection indication function, if there is a port loopback, the indicator light will flash to indicate;

● Support IEEE 802.3az energy-saving protocol, low power consumption, low heat generation, and can work stably for a long time;

● Support wireless access point (AP) and network surveillance camera (surveillance cameras) power supply through Category 5 Ethernet cable;

● 1-8 channels of Ethernet support standard IEEE802.3af/at power supply; each port can output a full power of 15.4W (IEEE802.3af), at is 25.5W (IEEE802.3at);

● Ethernet interface with three-level lightning protection, radar protection to GB/T17626.5 (IEC61000-4-5) short-circuit current wave 10/700μs, open-circuit peak output voltage 6KV standard;

● Without POE, it can be powered by AC220/DC-48V/+24V, and the power supply is built-in. When the POE function is powered by AC power, an external AC220V/48V power adapter is required;

● 10/100M Ethernet Interface 

Protocol: Conforms to IEEE 802.3, IEEE802.1Q (VLAN)

Rate: 10/100M adaptive, full/half duplex fully adaptive MAC

Address table: 8K MAC addresses can be learned

Physical interface: RJ45 seat, support Auto-MDIX (crossover/straight line adaptive)

● Ethernet POE Features

PoE standard: IEEE 802.3af/at

PoE Type: end-spanning method (optional middle-spanning method)

PoE port features: port output power

PoE transmission core: 1/2+, 3/6-pairs (4/5+, 7/8-pairs can be ordered)

● Environmental Indicators

Working temperature: -10℃—+60℃

Storage temperature: -40°C—+85°C

Working humidity: 0%-95% (non-condensing)

MTBF: ＞100,000 hours