Modular multi-service Fiber MUX

Short Description:

4 slots, support max 4*4E1/4*FE/4*GE/4*FE(physical isolation)/ 4*16voice/4*2v.35/4*2v.24/4*8serial,  Support 1+1 fiber back up, Console/SNMP management


  • FOB Price: US $1 - 600 / Piece
  • Min.Order Quantity: 1 Piece/1 Pair
  • Supply Ability: 2000 Piece/Pieces per Month
  • Port: Shanghai
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    Product Tags

    Modular multi-service Fiber MUX


    This device is modular structure point-to-point optical transmission equipment with LCD display, uses the FPGA chips and easy to upgrade. The Main board provide 4*100M channel Ethernet data and 2 AUX port which is for transmitting other data such as RS232/RS485/RS422, two optical interface for optional 1+1 auto protection switch (APS).

    4 slots of tributary with variant plug-in modules which included 4xE1 channels module, 4/8/16 x FXO/FXS module and 2x Nx64K V.35 module.The maximum capacity will be up 4 plug-in modules which could be combinations with above modules.The high flexibility, performance, is the best solution for voice/data/video services in existed market.


    modular type fiber multiplexer front2


    modular type fiber multiplexer back 2



    ◆ Provides total 16 E1 transparent transmission capacity ;

    ◆ With char 16*2 LCD display and SNMP agent inside.

    ◆ Provide Console manage interface(RS232)

    ◆ Provice one hotline channel for option;

    ◆ Provide two SFP fiber interfaces, one as master, the other as slave, insuring uninterrupted service transmission.

    ◆ Provide two fiber interface 1+1 protect(APS)function ,and ALS(Automatic Laser Shutdown/Reduction)function

    ◆ Provide 4 slots plug-in modules:

                     4×unFramed E1 module(75Ω)/(120Ω)

                    4×Framed E1 module(75Ω)/(120Ω),any timesolts can be set

                    4×FXO/FXS/EM2-4/Magnet telephone module

                   8×FXO/FXS/2 line audio/Magnet telephone module

                  16×FXO/FXS/2 line audio/Magnet telephone module

                   2×V.35 (2.048M Fixed speed) module

                  2×V.35 (N*64K N=1-32) module

                  4×RS232/422/485 module

                  4*FE to E1 bridge(wire speed 2.048M) module

    ◆ Provide 4FE(wire speed 100M)Ethernet channel, support mutual negatiate, Ethernet bandwidth is set on base on multiple of 32K.;

    ◆ Ethernet port supports full/half duplex, 10M/100M auto-adaptable;

    ◆ Ethernet port supports VLAN function and has 4 devision mode for user selection;

    ◆ Ethernet package size support 1916 byte and 4 Ethernet port could be set seperately;

    ◆ Has complete alarm function and can monitor remote device status;

    ◆ Supports E1 loop from remote so as to detect and manage device conveniently;

    ◆ The combination AC220V and DC-48V for redundant



    ◆ Fiber Multi-mode Fiber

    50/125um, 62.5/125um,

    Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

    Wave Length: 820nm

    Transmitting power: -12dBm (Min) ~-9dBm (Max)

    Receiver sensitivity: -28dBm (Min)

    Link budget: 16dBm


    ◆ Single-mode Fiber

    8/125um, 9/125um

    Maximum transmission distance: 40Km

    Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

    Wave Length: 1310nm

    Transmitting power: -9dBm (Min) ~-8dBm (Max)

    Receiver sensitivity: -27dBm (Min)

    Link budget: 18dBm


    ◆ E1 Interface

    Interface Standard: comply with protocol G.703;
    Interface Rate: n*64Kbps±50ppm;
    Interface Code: HDB3;

    E1 Impedance: 75Ω (unbalance), 120Ω (balance);

    Jitter tolerance: In accord with protocol G.742 and G.823

    Allowed Attenuation: 0~6dBm


    ◆ Ethernet interface(10/100M)

    Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

    Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

    MAC Address Capability: 4096

    Connector: RJ45, support Auto-MDIX


    ◆ FXS Phone Interface

    Ring voltage: 75V

    Ring frequency: 25HZ

    Two-line Impedance: 600 Ohm (pick up)

    Return loss: 40 dB


    ◆ FXO Switch Interface

    Ring detect voltage: 35V

    Ring detection frequency: 17HZ-60HZ

    Two-line Impedance: 600 Ohm (pick up)

    Return loss: 40 dB


    ◆ EM 2/4 Line

    AD: 0dB

    DA: -3.5dB

    Two/Four-line Impedance: 600 Ohm

    Return loss: 20 dB


    ◆ Working environment

    Working temperature: -10°C ~ 50°C

    Working Humidity: 5%~95 % (no condensation)

    Storage temperature: -40°C ~ 80°C

    Storage Humidity: 5%~95 % (no condensation)






    Download Datasheet:

    Modular type multiservice fiber multiplexer

  • Previous:
  • Next:


    Subscribe To Our Newsletter

    For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

    Follow Us

    on our social media
    • sns02
    • sns03
    • 1688
    • youtube
    WhatsApp Online Chat !