POE E1-FE Interface Converter af/at

Short Description:

This interface converter provides one unframed 2048K E1 or framed n*64Kbps E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.


  • FOB Price: US $1 - 600 / Piece
  • Min.Order Quantity: 1 Piece/1 Pair
  • Supply Ability: 2000 Piece/Pieces per Month
  • Port: Shanghai
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    Product Tags

    overview

     

    This interface converter provides one unframed 2048K E1 or framed n*64Kbps E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.

     

    feature

     

    ◆ Based on self -copyright  IC
    ◆ Support unframed mode (2048K) set and can manage the remote device condition ,
    ◆OAM management data did not take up user’s timeslot
    ◆ Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop back;
    ◆ Have indicator when the device is power-off or E1 line is broken or lose signal;
    ◆ Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;
    ◆ The Ethernet interface supports jumbo frames (2036 Bytes);
    ◆ Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering
    ◆ Ethernet interface supports10M/100M, half/full duplex auto- Negotiation and AUTO-MDIX (crossed line and straightly connected line self-adaptable );
    ◆ Have Ethernet monitor self-reset function, the equipment will not dead
    ◆ Can achieve the remote device setting any 5 mode of Ethernet and can closed the AUTO-MDIX function;
    ◆ Provide 2 clock types: E1 master clock and E1 line clock;
    ◆ The local device can forced the remote device rate follow it(when the device is unframed mode, that is invalid);
    ◆ Have three Loop Back Mode: E1 interface Loop Back (ANA)、Ethernet interface Loop Back(DIG)、Command the remote,Ethernet interface Loop Back(REM)
    ◆ Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;
    ◆ Ethernet supports standard IEEE802.3af / at power supply; Each port can be sufficient power output 15.4W (IEEE802.3af), at 25.5W (IEEE802.3at);

     

    parameter

     

    ◆ E1 Interface

    Interface Standard: comply with protocol G.703;
    Interface Rate: n*64Kbps±50ppm;
    Interface Code: HDB3;

    E1 Impedance: 75Ω (unbalance), 120Ω (balance);

    Jitter tolerance: In accord with protocol G.742 and G.823

    Allowed Attenuation: 0~6dBm

    ◆ Ethernet interface(10/100M)

    Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

    Interface Standard:     Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

    MAC Address Capability: 4096

    Connector:     RJ45, support Auto-MDIX

    ◆ Ethernet POE features  

    PoE standard: IEEE 802.3af / at

    PoE Type: End Crossing Method (optional

    intermediatebridging method)

    PoE Port Features: Port output power 15.4W /

    25.5W

    PoE transmission core: 1/2 +, 3/6-pair (optional 4/5 +, 7/8-pair)

    ◆ Working environment

    Working temperature:    -10°C ~ 50°C

    Working Humidity:    5%~95 % (no condensation)

    Storage temperature: -40°C ~ 80°C

    Storage Humidity: 5%~95 % (no condensation)

     

    spe

     

    Functional Description 1channel POE E1 – FE converter,support AF/AT
    Port Description One E1 interface;1*FE Interface
    Power Power supply: AC180V ~ 260V;DC –48V;DC +24VPower consumption: ≤10W
    Dimension Product Size:  Mini type  216X140X31mm (WXDXH),1.3KG/piece

     

    application

     

    20150403104534_13873

     

    Download Datasheet:

    POE E1-FE Interface Converter af/at


  • Previous:
  • Next:

  • Subscribe To Our Newsletter

    For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

    Follow Us

    on our social media
    • sns04
    • sns05
    • sns01
    • sns02
    • sns03
    WhatsApp Online Chat !