Product Category

Got any Questions? Call us Today!

+8618758069661

service@fctel.com.cn

Or leave us a message

Online Message

Industrial rail 1 port Profibus-DP Multiplexer ring type

View : 164
Type : Profibus Fiber Mux
Description :

This series of equipment supports 1 PROFIBUS DP to optical fiber relay with communication rate of 0-12mpbs; 1 channel PROFIBUS DP interface is transmitted on ring network optical fiber; 2 optical fiber interfaces and 1 PROFIBUS DP interface are adopted.

Overview

This series of equipment adopts large-scale FPGA design and original technology, which can simultaneously support 1 PROFIBUS DP to optical fiber relay with communication rate of 0-12mpbs; 1 channel PROFIBUS DP interface is transmitted on ring network optical fiber; 2 optical fiber interfaces and 1 PROFIBUS DP interface are adopted.

Photo

Features

The equipment is used in pairs, with local signal input and opposite signal output;

Provide 1-way PROFIBUS DP field bus with communication baud rate adaptive 9600-12mbps;

Provide two optical fiber lines, which can be automatically switched in case of line failure to ensure normal communication;

Support a variety of fiber network structure: point-to-point, star, chain, ring redundancy, and can be combined into more complex network topology. Support a variety of fiber network structure: point-to-point, star, chain, ring redundancy, and can be combined into more complex network topology. Support a variety of fiber network structure: point-to-point, star, chain, ring redundancy, and can be combined into more complex network topology The network topology structure of the network;

Multi mode fiber / single mode fiber is optional, multi mode fiber can transmit 2km, single mode fiber can transmit 20-120km, St / SC / FC interface is optional;

It has the function of signal fault protection, and displays the electrical interface and optical fiber operation status in all directions;

The lightning protection of PROFIBUS DP interface meets iec61000-4-5 (8 / 20 μ s) differential mode: 6kV impedance (2 Ω); common mode: 6kV impedance (2 Ω);

Support wide range 9-48v AC / DC input, support internal isolation, redundant dual power input, support overload protection and anti reverse connection protection;

It meets the requirements of industrial grade IV electromagnetic compatibility;

Ultra strong lightning protection function: anti lightning, anti induced high voltage, anti surge, etc;

High efficiency heat dissipation without fan reduces repair time;

The protection grade of IP40 shell can withstand the test of harsh environment;

DIN 35mm rail or wall mounted installation;

Wide temperature type: working temperature – 40 ℃ ~ + 85 ℃;

All models have passed 100% toaster test, warranty period: 5 years.

Parameters

●  Fiber optic      

Optical port: 2

Optical fiber: single fiber and double fiber

Optical fiber interface: FC / SC / St / LC (SFP)

Wavelength: 850nm / 1310nm multimode; 1310nm / 1550nm single mode

No relay transmission distance: 20 ~ 120km

Typical transmitting power:

Single mode 1310 / 1550nm: ≥ – 9dbm

Multimode 850nm: – 18dbm

Multimode 1310nm: – 25dbm

Acceptance sensitivity range: – 28dbm ~ – 40dbm

ProfibusDP interface   

Standard:Support Profibus DP standard

Rate:9.6kBit/s、19.2 kBit/s、45.45kBit/s、 93.75k kBit/s、187.5kBit/s、500kBit/s、 1.5MBit/s、6MBit/s and 12MBit/s.

Physical interface: 9-pin D-Sub jack connector with pin definitions in accordance with Profibus DP protocol specifications

Rate setting: 9600-12Mbps/s automatic identification

Signal delay (electrical port): ≤11Bit

Terminal resistance: This unit does not have a terminating resistor, please connect as needed

●  Working environment   

Working temperature: -40℃—+85℃

Storage temperature:  -40℃—+85℃

Working humidity: 0%—95%(no condensation)

MTBF:   >100,000 hours

Specifications

Product number

FC2P-P1G

Product function description

Transmit 1 port Profibus DP interface over fiber optic

Service port description

2 fiber optic interface; 1 Profibus DP interface

Power supply

Redundant dual power input: AC & DC9-48V power consumption <5W overload protection: support; reverse connection protection: support; redundancy protection: support

Access terminal: 4-core 5.08mm pitch plug-in terminal

Housing: IP40 protection grade, aluminum alloy

Installation method: rail mounting, wall mounting

Product Size

(Length × width × height)  133*120*40mm

Weight

0.45Kg/pc

Application

Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail