Industrial Din Rail 1-8 Channel DI/DO/AI/AO Server
- View : 369
- Share :
- Type :
- Description :
This industrial rail-mounted 1-8-channel DI/DO/AI/AO server is IP40 protection grade and is a server that enables DI/DO/AI/AO devices to immediately have networking capabilities. This product supports 1-8-channel DI/DO/AI/AO to 1-channel 100M electrical Ethernet + 1-channel 100M optical Ethernet. It can be installed in 35mm rail and wall-mounted styles to meet the needs of different application sites.
The serial port server supports a variety of network protocols, such as TCP, UDP, ARP, ICMP, HTTP, DNS, DHCP, and SNMP protocols; it has complete management functions, supports access control, fast configuration, online upgrades, etc.; supports Modbus TCP; supports WEB access. In addition, the management configuration tool based on the Windows platform provided can guide users to manage and configure the device step by step.
● Adopts ARM Cortex -M4, main frequency 192MHz processor;
● Supports 1*100M Ethernet + 1*100M optical SFP port, two ports are switch ports, support SFP optical module DDM management;
● Ethernet supports 10/100Base-T(X) adaptive Ethernet interface; supports auto-negotiation (Auto-Nego Full & half duplex), supports automatic cross-line detection (MDI/MDIX);
● Supports up to 8 DI/DO/AI/AO, every 2 channels as a unit, arbitrarily configure DI/DO/AI/AO, such as 2 DI+2 DO+2 AI+2 AO, or 4 DI+4 AI, each channel has an indicator light status indication;
● Analog input supports 12-bit resolution output, 2‰ accuracy, supports 2-wire, 3-wire, 4-wire sensor access; supports 0-20mA, 4-20mA, 0-5V, 0-10V, -5V-+5V 5 types of analog input signals.
● The dry contactinput supports dry interface or NPN, PNP transistor mode, and the dry contact output supports dry interface or 24V MOS tube mode;
● The optical interface supports three optical fiber transmission modes: multi-mode dual-fiber, single-mode dual-fiber, and single-mode single-fiber. SC/ST/FC/LC interfaces are optional.
● Supports Modbus TCP, TCP Server, TCP Client, UDP Server, UDP Client, and other working modes;
● Supports Windows configuration tools, serial ports, WEB and other configuration forms, and supports SNMP network management;
● Supports local and remote system firmware upgrades;
● Supports a wide range of 9-55V AC and DC power input;
● Supports internal isolation and redundant dual power input;
● The power supply supports overload protection and anti-reverse connection protection;
● Meets the requirements of industrial level 4 electromagnetic compatibility;
● Super lightning protection function: lightning protection, anti-inductive high voltage, anti-surge, etc.;
● No fan, efficient heat dissipation, reducing repair time;
● Anodized aluminum alloy shell, IP40 protection level, can withstand the test of harsh environments;
● Guide rail or wall mounting;
● Wide temperature type: working temperature -40℃~ +85℃;
● All models have passed 100% oven test;
Protocol: Compliant with IEEE 802.3ab, IEEE 802.3z
Speed: 10/100 adaptive full/half duplex adaptive
MAC address table: Can learn 4096 MAC addresses
Physical interface: RJ45 socket supports Auto-MDIX
Optical port: 1
Optical fiber: single-fiber dual-fiber
Optical fiber port: SC/FC/ST/LC(SFP) Optional
Wavelength: 850nm/1310nm multi-mode; 1310nm/1550nm single mode
Transmission distance without relay: 20~120Km
Typical transmission power:
Single mode 1310/1550nm: ≥-9dBm
Multi-mode 850nm: -18dBm
Multi-mode 1310nm: -25dBm
Receiving sensitivity range: -28dBm~- 40dBm
Output interface type:
Dry contact: signal relay dry contact output; 30VDC/0.5A, maximum switching frequency: 50HZ
Pulse quantity (wet contact):
Photo MOS relay output, 245VDC/0.12A, 0-VCC (VCC is the power supply voltage of this machine)
Response time:
Dry contact output: <1.2ms; wet contact output <0.6ms
Dry contact signal input:
Dry contact:; Wet contact: NPN&PNP
Output surge protection:
Dry contact output: None;
Wet contact output: TVS+solid discharge tube protection
Input and output range: 0~20mA (including 4~20mA)
Resolution: 12 bits
Sampling rate: 20K times/second
Time delay: <0.1ms
Maximum load capacity: 600Ω
Input resistance: 125Ω
Accuracy: 0.2% (normal temperature)
Input and output range: 0~10V (including 0~5V), -5V-+5V
Resolution: 12 bits
Sampling rate: 20K times/second
Time delay: <1ms
Maximum load capacity: 600Ω
Input resistance: 125Ω
Accuracy: 0.2% (normal temperature)
Operating temperature: -40 ℃ – +85 ℃
Storage temperature: -40 ℃ – +85 ℃
Humidity: 0% -95% (non-condensing)
MTBF: > 100,000 hours
Product Model |
FCT-081619 |
Product Function Description |
Transmit 8-channel DI/DO/AI/AO on Ethernet, industrial rail type |
Service Port Description |
8*DI/DO/AI/AO interface; 1*100M electrical port + 1*100M SFP optical port |
Power Supply |
Redundant dual power supply input DC9-55V or AC7-43V, power consumption <5W Overload protection: supported; reverse connection protection: supported; redundant protection: supported Access terminal: 4-core 5.08mm pitch plug-in terminal |
Product Size |
Housing: IP40 protection grade, aluminum alloy Dimensions: 133mm (length) x 120mm (width) x 40.0mm (height) Installation method: rail installation, wall-mounted installation |
Weight |
0.65Kg/PCS |
Case 1: Single application
Case 2: Paired Application
If you are interested in any product, please contact us. We will introduce our products to you in more detail