Product Category

Got any Questions? Call us Today!

+8618758069661

service@fctel.com.cn

Or leave us a message

Online Message

14 Ch Dry Contact Closure over Fiber Multiplexer | With 1 Ch Alarm Output

View : 34
Type : Dry Contact Closure over Fiber
Description :

This product provides 14 channels of unidirectional dry contact or 7 channels of bidirectional dry contact for transmission in optical fibers and provides one alarm output.

Overview

This 1-14-way switching value optical transceiver is a pure switching value (alarm value) industrial track type optical terminal machine, providing 1-14-way unidirectional switching value or 7-way bidirectional switching value for transmission in optical fibers, and providing one alarm output. This product solves the problem of It solves the problems of electromagnetic interference, ground ring interference and lightning damage, improves the reliability, security and confidentiality of data communication, and can be widely used in various industrial control, process control and traffic control, especially suitable for banks, power and Departments and systems with special requirements for electromagnetic interference environment.

Photo

Dry Contact Closure over Fiber Converter

Features

● Integrated circuits based on independent intellectual property rights

● It can support unidirectional 14-channel dry contact and bidirectional 7-channel dry contact, and provide one alarm output. When the optical fiber is broken or the power is off, one dry contact (the 16th) dry contact output is closed

● Each channel has an indicator light indicating the dry contact is on and off

● Automatic detection of the input dry contact on and off, when the state of the input, the state of the dry contact output, which is convenient for project opening

● When the dry contact is turned on or the optical fiber is not connected, its dry contact state is stable, and there will be no disorderly action state

● The normally open and normally closed state of the output dry contactcan be set through the DIP switch when the fiber is not connected

● Dry contact interface anti-radar to IEC61000-4-5 (8/20μS) differential mode: 6KV, impedance (2Ω); common mode: 6KV, impedance (2Ω) standard

● Support a wide range of AC and DC input, support internal isolation, redundant dual power input, power supply supports overload protection, anti-reverse connection protection

● Comply with industrial level 4 electromagnetic compatibility requirements

● Super lightning protection function: lightning protection, anti-inductive high voltage, anti-surge, etc.

● Fanless efficient heat dissipation, reducing repair time

● DC 9-55V DC power supply or AC9-50V AC power supply, no positive and negative poles;

Parameters

● Fiber

Optical port: 1

Optical Fiber: Single/Dual fiber

Fiber interface: SC/FC/ST/LC(SFP) Optional

Wavelength: 850nm/1310nm Multimode;1310nm/1550nm Single mode

Relay-free transmission distance: 0~80Km

Typical transmit power: single mode 100uw — 0.93mw

 

● Dry Contact Interface  

Output interface type:

Dry contact: signal relay dry contact output;

Pulse amount (wet contact): Optical MOS relay output, 0-VCC (VCC is the power supply voltage of the machine)

Response time dry contact output: <1.2ms; wet contact output <0.6ms

Switch signal dry contact output 30VDC/0.5A; wet contact output: 245VDC/0.12A

Maximum switching frequency: 50HZ

Output surge protection: dry contact output: none; wet contact output: TVS+solid discharge tube protection

 

● Environmental Index

Working Temperature: -40℃—+85℃

Storage Temperature: -40℃—+85℃

Working Humidity: 0%—95% (non-condensing)

MTBF: >100,000 hours

Specifications

Product Number

FCP-K14G-A

Product Function Description

Industrial rail type 14 channel Dry Contact and provides one alarm output optical terminal

Service Port Description

15 channels Dry Contact, 1 channel Optical Fiber Interface

Power Supply

Redundant dual power supply input DC9-48V, power consumption <5W

Overload protection: support; 

reverse polarity protection: support;

redundant protection: support

Access terminal: 4-core 5.08mm pitch plug-in terminal

Product Size

Shell: IP40 protection grade, aluminum alloy material

Dimensions: 133mm(L) x 120mm(W) x 50.0mm(H)

Installation method: guide rail installation, wall-mounted installation

Weight

0.85KG/PCS

Application

application of Dry Contact Closure over Fiber Multiplexer

Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail