Inquire Now
This series of products are Ethernet IEEE802.3 media converters, which can realize the conversion between 10/100base-T twisted pair and 100base-FX optical fiber media or extend network transmission, and are mainly used for long-distance optical fiber networks (20/40/ 60/80/120 km) transmission. This product provides 1 100M optical port; 16 100M Ethernet electrical ports, and shares 100M bandwidth (Ethernet interface is a switch port, which can support VLAN division); It has a complete alarm function, and the whole machine is stable and reliable. , Low power consumption, high integration and small size.
- Product Search Guide: space = AND, | = OR, ! = NOT
16FE to 100base-fx Media Converter (Power Internal)
Model
Contact us
Description :
This series of products are Ethernet IEEE802.3 media converters, which can realize the conversion between 10/100base-T twisted pair and 100base-FX optical fiber media or extend network transmission
Overview
Features
◆ The equipment provides 16 100M Ethernet electrical ports and shares 100M bandwidth; 1 100M optical port;
◆ Transceiver device crash monitoring and self-reset functions can work for a long time without crashing in a large traffic video transmission environment, greatly reducing the workload of equipment maintenance;
◆ The transceiver has a built-in 2.5Mbit high-rate buffer, and the backplane exchange bandwidth is 3.4G, which can prevent the IP camera from being caused by the burst of MPGE4 or H.264 I frames in the environment of rapid changes in the monitoring picture such as the reflection of the car lights on the road at night and rain The transmission picture freezes;
◆ Supports the transmission of VLAN ultra-long data packets, supports Ethernet packets with a maximum of 1664 bytes or more, and is suitable for some giant frame network image transmission protocols,
◆ Supports full-duplex and half-duplex network communication, with auto-negotiation capability. Electrical port MDI/MDI-X self-adaptive without manual adjustment, which is convenient for on-site wiring;
◆ Can communicate with central office 1 optical 1 electric 100M 4U card type equipment;
◆ The Ethernet interface is equipped with three-level lightning protection, against radar to GB/T17626.5 (IEC61000-4-5) short-circuit current wave 8/20μs, open-circuit peak output voltage 6KV standard.
◆ A variety of power supply options: AC220V, DC-48V/DC+24V/ DC+12V, etc.;
Parameters
Fiber
Optical port: 1
Optical fiber: single fiber and double fiber
Optical fiber interface: SC / FC / St / LC (SFP) optional
Wavelength: 850nm / 1310nm multimode; 1310nm / 1550nm single mode
Transmission distance without relay: 0 ~ 80km
Typical transmission power: single mode 100uw-0.93mw
10/100M ethernet interface
Protocol:IEEE 802.3，IEEE 802.1Q(VLAN)
Rate: 10 / 100M adaptive, full / half duplex Fully Adaptive MAC
Address table: can learn 4K MAC address
Physical interface: RJ45, supporting auto mdix (Cross / through line adaptation)
Working environment
Working temperature: -10 ° C – +60 ° C
Storage temperature: -40 ° C – +85 ° C
Working humidity: 0% – 95% (no condensation)
MTBF: >100,000 hours
Specification
| Functional Description |
1-16 channel FE ethernet port fiber media converter, power internal |
| 16 FE Ethernet interfaces; one FE optical Ethernet interface | |
|
Power |
AC or DC power |
|
Dimension |
Dimensions: 216mm (length) x 140mm (width) x 31.0mm (height) |
|
Weight |
1 kg/set |
Application
Related Products
Inquire Now
PRODUCT INQUIRY
Tell us about your application.
Share your devices, interfaces or quantity—our team will help you choose a suitable solution.
✓ Prompt response
↔ Technical guidance
✓ Confidential details
+ Custom requirements
We use your information only to respond to this inquiry.
