Product Category

Got any Questions? Call us Today!


Or leave us a message

Online Message

8E1+4FE PDH Fiber Multiplexer

View : 132
Type : Physical Isolation PDH Mux
Description :

Provide 1-8 E1 interfaces, primary and backup fiber optical interface connector, 1-4 channel 10/100M Fast Ethernet interface , as well as two business expansion interface.


This series of equipment is the company developed the PDH fiber transmission dedicated VLSI developed on the basis of point to point optical transmission equipment. Provide 1-8 E1 interfaces, primary and backup fiber optical interface connector, 1-4 channel 10/100M Fast Ethernet interface , as well as two business expansion interface. 2 Extended service interface can be used as RS232 / RS485 / RS422 asynchronous data , the application is very flexible. Optional one digital service telephone, the application is very flexible. With a sound alarm function, the whole stable, reliable, low power consumption, high integration, small size.



● Based on self-copyright IC

● 1-4 port 10/100M Fast Ethernet interface ,4 port ethernet port is switch interface;

● ProvideRS232 Console manage interface (optional)

● Provide two fiber interface 1+1 protect(APS)function (optional)

● Ethernet interface rate is 10/100M, half/full duplex Auto-Nego

● Ethernet package supportjumbo frames,up to 10240 byte

● E1 interface comply with G.703, adopts digital clock recovery and smooth phase-lock technology

● Uses standard 2 wire telephone(non-telephone handles) set as engineering order-wire hotline(optional)

● When optical lose signal, it can detect the remote device is power off or fiber is disconnected, and indicates alarm by LED

● The local device can view the remote device working condition

● Provide command the remote interface Loop Back, support local E1Loop Back function, support E1 LOS and AIS alarm ,ease line maintenance

● The transmission distance is up to 2-100Km without interruption(Default FC dual fiber single mode 20km).

● Support SNMP manager (SNMP agent inside)optional

● AC 220V, DC-48V, DC24V can be optional

● DC-48V/DC24V power supply polarity detection function, Polarity-Free


● Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

● E1 Interface

Interface Standard: comply with protocol G.703;

Interface Rate: 2048Kbps±50ppm;

Interface Code: HDB3;

E1 Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation: 0~6dBm

● Ethernet interface (10/100M)

Interface rate:    10/100 Mbps, half/full duplex auto-negotiation

Interface Standard:    Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector: RJ45, support Auto-MDIX

● Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)



Model Number: FCP-E8WF4

Functional Description

8E1 PDH,19”inch 1U, 4 * Ethernet 10/100M,Optional(order wire phone,with Console , SNMP,1+1 Back up Optic fiber)

Port Description

1+1 optical port, 8*E1 interfaces (75/120ohms), 4 FE interfaces,1*RS232 Console interface,1*SNMP Ethernet interface, one engineering order-wire telephone interface


Power supply: AC180V ~ 260V;DC –48V;DC +24V

Power consumption: ≤10W


Product Size: 19 inch 1U   483X138X45mm(WXDXH)




Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail