64Voice+2GE Fiber Multiplexer

This device provides 64 channel telephone and 2 channel 10/100/1000M Ethernet interface (Wire Speed 1000M), Ethernet interface is the switch interface and can support VLAN. The product works reliably and stably with low power consumption, high integration, small size, easy installation and maintenance.

● Based on self-copyright IC

● Voice port supports FXO and FXS port, supports FXO/FXS, Magnet Telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user’s telephone;

● 1~64 channel Voice access, Voice FXO/FXS interface, and support for caller ID/reverse polarity billing/fax function;

● It supports various sites’ mutual number allocation function;

● Ethernet interface supports 10/100/1000M, half/full duplex auto-adaptable, and supports VLAN;

● Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable)

● Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 8/20μs,the peak output voltage 6KV open standards.

● The transmission distance is up to 2-120 Km without interruption

● AC 220V, DC-48V, DC24V can be optional

● Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5/125um single mode fiber, attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @9/125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

● Ethernet Interface(10/100/1000M)

Interface Rate: 10/100/1000 Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector: RJ45, support Auto-MDIX

● FXS Phone Interface

Ring voltage: 75V

Ring frequency: 25HZ

Two-line Impedance: 600 Ohm (pick up)

Return loss: 40dB

● FXO Switch Interface

Ring detect voltage: 35V

Ring detection frequency: 17HZ-60HZ

Two-line Impedance: 600 Ohm (pick up)

Return loss: 40dB

Return loss: 20dB

● Working Environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)