Din Rail Lipstick Type 1*GE to 1*FE/GE Adaptive Optical Media Converter

This series of products is an industrial-grade 1-port 10/100/1000Base-T twisted pair cable and 100Base-FX/1000Base-X adaptive optical fiber media conversion or extended network transmission optical fiber conversion, mainly used for optical fiber network long-distance (20/40/60/80/120 kilometers) transmission. This product provides 1 Gigabit optical port; 1 Gigabit Ethernet electrical port. With complete alarm function, the whole machine works stably and reliably, with low power consumption, high integration, small size, and provides 35mm industrial rail type and wall-mounted installation. Small size 24 (length) x 80 (width) x 20mm (height), saving user space.

● Fiber          

Optical port: 1

Fiber: single fiber and dual fiber

Fiber interface: LC (SFP)

Wavelength: 

850nm/1310nm multimode;

1310nm/1550nm single mode

Transmission distance without relay: 0~80Km

Typical transmission power:

single mode 100uw — 0.93mw

● 10/100/1000M ethernet interface

Protocol: Compliant with IEEE 802.3ab，IEEE 802.3z

Rate:10/100/1000M adaptive, full/half duplex fully adaptive

MAC address table: 4096 MAC addresses can be learned

Physical interface: RJ45, Auto-MDIX support

● Working environment   

Working temperature:-40℃—+85℃

Storage temperature: -40℃—+85℃

Working humidity: 0% – 95% (no condensation)

MTBF: >100,000 hours

● The device provides 1 Gigabit Ethernet electrical port and 1 100M/100M optical port; the Ethernet optical port is adaptive between Gigabit and 100M.

● The electrical interface (RJ45 interface) supports 10/100/1000M adaptive, full/half-duplex mode, and MDI/MDI-X automatic detection;

● The optical interface supports three fiber transmission modes: multi-mode dual-fiber, single-mode dual-fiber, and single-mode single-fiber, and LC interface;

● Supports the transmission of VLAN ultra-long data packets, supports the matching of switch products with IEEE802.1q protocol, and supports Ethernet packets with a maximum size of 10K bytes;

● It has functions such as broadcast storm protection, balanced traffic, conflict isolation, and error detection;

● The Ethernet interface has three levels of lightning protection, and the lightning protection reaches GB/T17626.5 (IEC61000-4-5) short-circuit current wave 10/700μs, open-circuit peak output voltage 4KV, and internal resistance 40 ohm standard;

● The power supply supports TYPE C 5V power supply access

● Fanless and efficient heat dissipation reduces repair time;

● Provides DIN 35mm rail installation or wall-mounted installation;

● Wide temperature type: working temperature -40℃~ +85℃;

● All models have passed 100% oven test;