Inquire Now
This series is IEEE802.3 Ethernet media converters can achieve 10 / 100Base-T twisted pair and 10 / 100Base-FX or 10,100Base-T twisted pair and 10,100Base-FX’s two kinds of media media conversion or extension of the network between the transmission distance, mainly for (20/40/60/80/120 km) long distance optical fiber transmission network. IEEE802.3at Power over Ethernet ports to provide support through a wireless access point power Category 5 Ethernet cable (AP) or IP phones and other devices.
- Product Search Guide: space = AND, | = OR, ! = NOT
POE FE (802.3at) Fiber Media Converter
Model
FCM-F1-AT
Description :
This IEEE802.3 Ethernet media converter can achieve 10/100Base-T twisted pair and 10/100Base-FX or 10/100Base-T twisted pair and 10/100Base-FX's two kinds of media conversion or extension of the network between the transmission distance.
Overview
Features
● Automatically adapt to 10Mbps and 100Mbps environment, easy to upgrade the network;
● Device provides one Ethernet port, an Ethernet optical interface
● PSE power company for Ti chip, high stability;
● Ethernet port supports standard IEEE802.3at Power
● Power over Ethernet ports for maximum power 25.5W
● Support full and half duplex network communication, with auto-negotiation capability;
● VLAN support the transmission of long packets can support IEEE802.10 protocol products matching switches used to support up to 1916-byte Ethernet packets;
● Support UTP port cross-connect switch selection, easy to install system debugging;
● Capable of VLAN classification based PORT, this method does not affect the division of the remote device
● 1Q VLAN division, then this, the remote interface can be divided into the same VLAN
● Devices with Console port supports super terminal control device
Parameters
● Ethernet UTP Interface
Interface rate: 10/100 M, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
● Optical Ethernet Interface
Wave Length: 1310nm, 1550nm
Interface rate: 100 M, half/full duplex
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability:4096
Connector: FC/SC
Fiber Transmission Distance is limited by optical circuit loss and additional loss as a result of connectors, fittings, and patch panel.
Transmission distance may also be limited by fiber optic bandwidth.
● Ethernet POE Characteristics
POE standard: IEEE (port output power 25.5W)
POE type: the end of the cross-connection (optional for mid-span)
POE port: port output power of 25.5W
POE: 1/2+, 3/6- wireline (optional for 4/5+, 7/8- line)
● Working Environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Specifications
|
Model |
Model Number: FCM-F1-AT |
|
Functional Description |
1 * FE fiber optic transceivers, POE function, Output power 25.5W |
|
Port Description |
One Fiber interface; 1*FE Interface |
|
Power |
Power supply: AC180V ~ 260V; DC –48V; DC +24V Power consumption: ≤10W |
|
Dimension |
Product Size: 140*110**30mm (WXDXH) |
|
Weight |
0.5KG |
Application
Related Products
Documentation and project verification — FCM-F1-AT
Before ordering or wiring, confirm the exact model and configuration, interface pinout, optical or network compatibility, power input and installation conditions. Optional configurations are not interchangeable.
Browse FCTEL technical documents · Request the current model-specific datasheet and wiring diagram
Inquire Now
PRODUCT INQUIRY
Tell us about your application.
Share your devices, interfaces or quantity—our team will help you choose a suitable solution.
✓ Prompt response
↔ Technical guidance
✓ Confidential details
+ Custom requirements
We use your information only to respond to this inquiry.
