+8618758069661 [email protected]
Product Search Guide: space = AND, | = OR, ! = NOT
16E1+4FE (Physical isolation) PDH Fiber Multiplexer
16E1+4FE (Physical isolation) PDH Fiber Multiplexer
16E1+4FE (Physical isolation) PDH Fiber Multiplexer
16E1+4FE (Physical isolation) PDH Fiber Multiplexer

16E1+4FE (Physical isolation) PDH Fiber Multiplexer

3,104 +6
Inquire Now
Model FCP-E16WF4
Description :

It provides 1-16 E1 interfaces, primary and backup fiber optical interface connector, 1-4 physical isolation 10/100M Fast Ethernet interface (independent four-wire speed 100M, total bandwidth is 4*100M), as well as 2 business expansion interface.

16E1+4FE (Physical isolation) PDH Fiber Multiplexer
16E1+4FE (Physical isolation) PDH Fiber Multiplexer
16E1+4FE (Physical isolation) PDH Fiber Multiplexer
16E1+4FE (Physical isolation) PDH Fiber Multiplexer

Overview

The device provides 16 E1 interfaces, primary and backup fiber optical interface connectors, 4 physical isolation 10/100M Fast Ethernet interfaces (independent four-wire speed 100M,total bandwidth is 4*100M), as well as 2 business expansion interfaces. 2 extended service interfaces can be used as RS232/RS485/RS422 asynchronous data ports, a digital service telephone is optional, the application is very flexible. The device has a sound alarm function, it’s stable and reliable, and has low power consumption, high integration, small size.

Features

● Based on self-copyright IC;

● 4 physical isolation 10/100M Fast Ethernet interface, every FE Ethernet independent wire speed is 100M, the total bandwidth is 4*100M;

● Provide Console manage interface (RS232);

● Provide 2 fiber interface 1+1 protect (APS) function;

● Ethernet interface rate is 10/100M, half/full duplex Auto-Nego;

● Ethernet package supports jumbo frames, up to 10240 byte;

● E1 interface complies with G.703, adopts digital clock recovery and smooth phase-lock technology;

● Uses standard 2 wire telephone(non-telephone handles) set as engineering order-wire hotline (optional);

● When the optical loses signal, it can detect the remote device is powered off or the fiber is disconnected and indicates an alarm by LED;

● The local device can view the remote device’s working condition;

● Provide command the remote interface Loop Back, support local E1 Loop Back function, support E1 LOS and AIS alarm, ease line maintenance;

● The transmission distance is up to 2-100Km without interruption;

● Support SNMP manager (SNMP agent inside);

● AC 220V, DC-48V, DC24V can be optional;

● DC-48V/DC24V power supply polarity detection function, Polarity-Free.

Parameters

●  Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

 

● E1 Interface

Interface Standard: comply with protocol G.703;

Interface Rate: 2048Kbps±50ppm;

Interface Code: HDB3;

E1 Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation: 0~6dBm

 

● Ethernet Interface (10/100M)

Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector: RJ45, support Auto-MDIX

 

● Working Environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation) 

Specifications

Model

Model Number: FCP-E16WF4

Function Description

16E1 PDH,  4*Ethernet physical isolation (total Bandwidth 4*100M), 19”inch 1U, Optional (order wire phone, Console, SNMP, 1+1 Back up Optic fiber)

Port Description

1+1 optical port, 16 E1 interfaces (75/120 ohms), 4 FE interfaces,1*RS232 Console interface, 1*SNMP Ethernet interface, one engineering order-wire telephone interface

Power

Power supply: AC180V ~ 260V; DC –48V; DC +24V

Power consumption: ≤10W

Dimension

Product Size: 19 inch 1U   483X138X45mm(WXDXH)

Weight

3KG

Application

application of 16e1 pdh multiplexer with 4fe

Documentation and project verification — FCP-E16WF4

Before ordering or wiring, confirm the exact model and configuration, interface pinout, optical or network compatibility, power input and installation conditions. Optional configurations are not interchangeable.

Browse FCTEL technical documents · Request the current model-specific datasheet and wiring diagram

Inquire Now

PRODUCT INQUIRY

Tell us about your application.

Share your devices, interfaces or quantity—our team will help you choose a suitable solution.

Prompt response Technical guidance Confidential details Custom requirements

We use your information only to respond to this inquiry.