This device provides 4*E1 interfaces, a 10/100M Ethernet interface, and a standard 2-wire telephone as an engineering order-wire (optional).
This device provides 4*E1 interfaces, a 10/100M Ethernet interface (Line Speed 100M), and a standard 2-wire telephone as an engineering order-wire (optional). It is very flexible and it has an alarm function. The work is reliable and stable, and it has low power consumption, high integration, and small size.
● Based on self-copyright IC;
● Modular wide dynamic optical detector;
● Ethernet (Line Speed 100M) interface rate is 10/100M, half/full duplex Auto-Nego;
● Uses standard 2-wire telephone (non-telephone handles) set as engineering order-wire hotline (optional);
● E1 interface complies with G.703, it adopts digital clock recovery and smooth phase-lock technology;
● When the optical signal is lost, it can detect whether the remote device is powered off or the fiber is disconnected, and indicates an alarm by LED;
● The local device can view the remote device’s working condition;
● Provide command the remote interface Loop Back, ease line maintenance;
● The transmission distance is up to 2-120Km without interruption;
● AC 220V, DC-48V, DC+24V can be optional;
● DC-48V/DC+24V power supply with automatic polarity detection function, when installed without distinction between positive and negative.
Multi-mode Fiber
50/125um, 62.5/125um,
Maximum transmission distance: 5Km @ 62.5/125um single mode fiber, attenuation (3dbm/km)
Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
Link budget: 16dBm
Single-mode Fiber
8/125um, 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9/125um single mode fiber, attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
Link budget: 18dBm
Interface Standard: comply with protocol G.703;
Interface Rate: 2048Kbps±50ppm;
Interface Code: HDB3;
E1 Impedance: 75Ω (unbalance), 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation: 0~6dBm
Interface rate: 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
| Model |
FCP-E4F1 |
|
Function Description |
4E1+1*FE PDH, order wire phone |
|
Port Description |
One optical port, 4 E1 interface (75/120 ohms), 1 FE Ethernet interface |
|
Power |
Power supply: AC180V ~ 260V; DC–48V; DC+24V Power consumption: ≤10W |
|
Dimension |
Product Size: Desk-Top Type 216X138X41mm(WXDXH) |
|
Weight |
1.25KG/PCS |
Tell us what you need. We can help with product selection and a quotation.
Online Message
Inquire Now
