Unframed E1-V.35 interface Converter

     This interface converter provides one E1 interface and one V.35 interface to achieve Unframed E1 interface transferring to V.35 interface.The data channel rate is 2.048Mbps. The device has inter-set loop test function to facilitate the project launching and daily maintenance.

● Based on self-copyright IC 
● Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;
● After strict testing and a practical verification system, completely comply with protocol ITU-T V.35, G.703, G.704
● Have three Loop Back Mode: E1 interface Loop Back (ANA)、V.35 interface Loop Back(DIG)、Command the remote V.35 interface Loop Back(REM)
● Have pseudo-random code test function, easily line opened, can be used as a 2M BER Tester
● AC 220V, DC-48V, DC+24V, DC Power and Polarity-Free

E1 interface 
Interface Standard: comply with protocol G.703;
Interface Rate: 2048Kbps±50ppm;
Interface Code: HDB3;
Impedance: 75Ω (unbalance), 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation: 0~6dBm

V.35 interface 
Interface rate: n*64Kbps
Interface Standard: Compatible with V.35 Standard
Connector: DB25
Connect Mode: DCE
Clock Type: G.703 restored clock, Internal clock 

Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)