Product Category

Got any Questions? Call us Today!

+8618758069661

service@fctel.com.cn

Or leave us a message

Online Message

4E1+4FE(Physical isolation) PDH Fiber Multiplexer

View : 111
Type : Physical Isolation PDH Mux
Description :

Provide 1-4 E1 interfaces, primary and backup fiber optical interface connector, 1-4 physical isolation 10/100M Fast Ethernet interface (independent four-wire speed 100M,total bandwidth is 4*100M), as well as two business expansion interface.

Overview

This series of equipment is the company developed the PDH fiber transmission dedicated VLSI developed on the basis of point to point optical transmission equipment. Provide 1-4 E1 interfaces, primary and backup fiber optical interface connector, 1-4 physical isolation 10/100M Fast Ethernet interface (independent four-wire speed 100M,total bandwidth is 4*100M), as well as two business expansion interface. 2 Extended service interface can be used as RS232 / RS485 / RS422 asynchronous data , the application is very flexible. Optional one digital service telephone, the application is very flexible. With a sound alarm function, the whole stable, reliable, low power consumption, high integration, small size.

Photo

 

Features

● Based on self-copyright IC

● 1-4 physical isolation 10/100M Fast Ethernet interface ,every FE Ethernet independent wire speed is 100M,total bandwidth is 4*100M;

● Provide Console manage interface (RS232)

● Provide two fiber interface 1+1 protect(APS)function

● Ethernet interface rate is 10/100M, half/full duplex Auto-Nego

● Ethernet package supportjumbo frames,up to 10240 byte

● E1 interface comply with G.703, adopts digital clock recovery and smooth phase-lock technology

● Uses standard 2 wire telephone(non-telephone handles) set as engineering order-wire hotline(optional)

● When optical lose signal, it can detect the remote device is power off or fiber is disconnected, and indicates alarm by LED

● The local device can view the remote device working condition

● Provide command the remote interface Loop Back, support local E1Loop Back function, support E1 LOS and AIS alarm ,ease line maintenance

● The transmission distance is up to 2-100Km without interruption

● Support SNMP manager (SNMP agent inside)

● AC 220V, DC-48V, DC24V can be optional

● DC-48V/DC24V power supply polarity detection function, Polarity-Free

Parameters

● Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

● E1 Interface

Interface Standard: comply with protocol G.703;

Interface Rate: 2048Kbps±50ppm;

Interface Code: HDB3;

E1 Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation: 0~6dBm

● Ethernet interface (10/100M)

Interface rate:    10/100 Mbps, half/full duplex auto-negotiation

Interface Standard:    Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector: RJ45, support Auto-MDIX

● Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model

Model Number: FCP-E4WF4

Functional Description

4E1 PDH, 4 * Ethernet physical isolation(total Band width 4*100M),order wire phone,19”inch 1U,with Console , SNMP,1+1 Back up Optic fiber

Port Description

1+1 optical port, 4*E1 interfaces (75/120ohms), 4 FE interfaces,1*RS232 Console interface,1*SNMP Ethernet interface, one engineering order-wire telephone interface

Power

Power supply: AC180V ~ 260V;DC –48V;DC +24V

Power consumption: ≤10W

Dimension

Product Size: 19 inch 1U   483X138X45mm(WXDXH)

Weight

3KG

Application

Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail