Product Category

Got any Questions? Call us Today!

+8618758069661

service@fctel.com.cn

Or leave us a message

Online Message

64Voice+2FE Fiber Multiplexer

View : 969
Type : RJ11 Type
Description :

This device provides 1-64 channels telephone and 2 channels 10/100M Ethernet interface (Wire Speed 100M).

Overview

This device provides 64 channels telephone and 2 ports 10/100M Ethernet (Wire Speed 100M). 2 ports Ethernet interfaces are switch interfaces, which can support VLAN. 

Photo

pots rj11 phone line over fiber converter pots rj11 phone line over fiber converter

Features

The voice interface supports FXO/FXS. The FXO port is connected to a PBX, while the FXS port is connected to the user’s telephone set.

The FXO/FXS telephone interface supports Caller ID display, reverse polarity billing, and fax function.

It supports mutual dialing between two sites.

● Ethernet interface supports 10/100M, half/full duplex auto-adaptable, support VLAN.

● Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable).

The telephone interface is equipped with lightning protection that complies with GB/T17626.5 (IEC61000-4-5) standards for short circuit current wave 10/700μs and can withstand peak output voltages of up to 6KV under open circuit conditions.

● The transmission distance is up to 2-120Km without interruption.

● AC 220V, DC-48V, DC24V can be optional.

Parameters

● Fiber

Multi-mode Fiber

50/125um, 62.5/125um

Maximum transmission distance: 5Km @ 62.5/125um single mode fiber, attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9/125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

 

● Ethernet Interface (10/100M)

Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Table Capacity: 4096

Connector: RJ45, support Auto-MDIX

 

● FXS Phone Port

Ring voltage: 75V

Ring frequency: 25HZ

2-wire Impedance: 600 Ohm (off-hook)

Return loss: 40 dB

 

● FXO Trunk Port

Ring detect voltage: 35V

Ring detection frequency: 17Hz-60Hz

2-wire Impedance: 600 Ohm (off-hook)

Return loss: 40 dB

Return loss: 20 dB

 

● Working Environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model FCP-O64F2b/FCP-S64F2b
Ports Description 64 * telephone, 2 * 100 Mbps Ethernet, 1* Fiber port
Power Supply

Power supply: AC180V ~ 260V; DC –48V; DC +24V

Power consumption: ≤10W

Dimension Product Size:   485*138*45mm(WXDXH) 19 1U
Weight

2.0KG

Application

application of pots rj11 phone line over fiber converter

                   

Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail