Product Category

Got any Questions? Call us Today!

+8618758069661

service@fctel.com.cn

Or leave us a message

Online Message

8Voice+FE Fiber Multiplexer | RJ11 Type

View : 829
Type : RJ11 Type
Description :

This device provides 8-channel telephone and 1 channel 10/100M Ethernet interface (Wire Speed 100M).

Overview

This device provides 8-channel telephone and 1-channel 10/100M Ethernet interface (Wire Speed 100M). The Ethernet interface is a switch interface that can support VLAN.

Photo

RJ11 TO fiber

Features

● The local end can display the fiber connection status of the remote device.

The voice interface supports the FXO/FXS port. The FXO port is connected to a PBX, while the FXS port is connected to the user’s telephone set.

The FXO/FXS voice port supports Caller ID display, reverse polarity billing, and fax function.

The voice port supports mutual dialing between two sites.

The Ethernet interface supports AUTO-MDIX (crossed line and straightly connected line self-adaptable).

The device comes with an external AC220V/5-12V power adapter, and can also be used with an external DC-48V/5-12V power adapter.

The telephone interface is equipped with lightning protection that complies with GB/T17626.5 (IEC61000-4-5) standards for short circuit current wave 10/700μs and can withstand peak output voltages of up to 6KV under open circuit conditions.

Parameters

● Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5/125um single-mode fiber, attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9/125um single-mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

 

● Ethernet Interface (10/100M)

Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Table Capacity: 4096

Connector: RJ45, support Auto-MDIX

 

● FXS Phone Port

Ring voltage: 75V

Ring frequency: 25HZ

2-wire Impedance: 600 Ohm (off-hook)

Return loss: 40 dB

 

● FXO Trunk Port

Ring detect voltage: 35V

Ring detection frequency: 17Hz-60Hz

2-wire Impedance: 600 Ohm (off-hook)

Return loss: 40 dB

Return loss: 20 dB

 

● Working Environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model

FCP-O8F1b/FCP-S8F1b

Ports Description

8 * telephone, 1 * 100 Mbps Ethernet, 1 * Fiber port

Power Supply

Power supply: DC5-12V

Power consumption: ≤10W

Dimension

 90*104*31 mm (WXDXH) mini type

Weight

0.8KG

Application

application of  rj11 to fiber

                   

Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail