8 Channels Gigabit Ethernet Physical Isolation (1+1 Optical Backup) Media Converter FCP-G8p

This product is an Ethernet IEEE 802.3 media converter, capable of transmitting 8-port 10/100/1000Base-T signals over fiber optic cable.  All 8 ports are physically isolated, each achieving a bidirectional bandwidth of 8*1000M.  Fiber optic transmission distances of 20/40/60/80 kilometers are supported. Each of the 8 Gigabit Ethernet electrical ports has its own independent Gigabit bandwidth, transmitted through a single fiber optic cable. The Ethernet signals received at the other end are also completely independent, without interference or mutual influence, thus achieving physical isolation. This product is suitable for applications in finance, securities, and security departments that require simultaneous construction of internal and public information networks, and where 8 networks need to be highly physically isolated; it is also suitable for situations where fiber optic cable resources are particularly limited but many independent Ethernet channels are required; it features one 10 Gigabit fiber optic port.

● It provides eight physically isolated 1000M Ethernet channels with 10 Gigabit optical port bandwidth, ensuring complete physical isolation for all eight Gigabit Ethernet channels;

● It supports both sides operating at Gigabit speed or both sides at 100Mbps speed, but does not support asymmetrical speed communication (one end 100Mbps, the other end Gigabit);

● It provides two SFP optical ports (main fiber interface and backup fiber interface; when the main fiber network is disconnected, the backup fiber network automatically connects without affecting signal transmission);

● The electrical ports automatically adapt to 10/100/1000Mbps environments, supporting full-duplex and half-duplex network communication, and MDI/MDI-X auto-adaptation without manual adjustment;

● Each Ethernet channel supports Ethernet packets larger than 10K bytes,suitable for photoelectric converters used in large LED screens;

● Network management allows real-time viewing and management of the interface status and settings of both the local and remote Ethernet connections; the device has a power-off detection function, which can detect whether the remote device is powered off or the fiber is disconnected when the optical signal is lost;

● The Ethernet interface has three levels of lightning protection, meeting the GB/T17626.5 (IEC61000-4-5) standard with a short-circuit current waveform of 10/700μs and an open-circuit peak output voltage of 4KV;

● Fanless high-efficiency heat dissipation reduces repair time;

● DC9-15V power input;

● Optical FiberInterface  

Optical Ports: 1, 2 (1+1 fiber backup)

Fiber Type: Single-fiber or dual-fiber

Fiber Interface: LC (SFP)

Wavelength: 850nm/1310nm multimode; 1310nm/1550nm single-mode

Transmission Distance without Repeater: 0~80km

Typical Transmit Power: Single-mode 100µW – 0.93mW

● 10/100/1000M Ethernet Interface  

Protocol: Compliant with IEEE 802.3ab, IEEE 802.3z

Rate: 10/100/1000M adaptive, full/half duplex adaptive

MAC address table: 4096 MAC addresses can be learned

Physical interface: RJ45 support Auto-MDIX

● Environmental Index

Working temperature: -10℃—+55℃

Storage temperature: -40℃—+85℃

Working humidity:    0%—95% (non-condensing)

MTBF:  >100,000 hours