Managed 4FE Fiber Media Converter (Console/OAM Remote Management)

● 4 channels automatically adapt to the 10/100Mbps, which is convenient to upgrade the electrical port MDI/MDI-X adaptive with different networks without manual adjustment, which is convenient for on-site wiring;

● The media converter has crash monitoring and self-reset function, and can work for a long time in a large-flow video transmission environment without crashing, greatly reducing the workload of equipment maintenance;

● The device has a built-in large-capacity and high-rate buffer, which can avoid the phenomenon of frame burst caused by the rapid change of the monitoring picture of the IP camera in the environment of the rapid change of the monitoring picture such as the reflection of car lights on the road at rainy night;

● Supports the transmission of VLAN ultra-long data packets, supports Ethernet packets with a maximum of 10K bytes or more, and it is suitable for some giant frame network image transmission protocols;

● With the Console interface, 4 Ethernet interfaces can be set as exchange ports, and 4 channels of QinQ isolation, bandwidth setting, priority setting, etc. can also be set;

● The device adopts Ethernet switching chip + FPGA solution, with remote OAM management frame function, and it can be interconnected with a 2U plug-in card 1*optical+1*electrical media converter card with SNMP network management. The device can be managed by SNMP software; it can also support Console (CLI) network management;

● Ethernet port with 3-level lightning protection, anti-radar to GB/T17626.5 (IEC61000-4-5) short-circuit current wave 8/20μs, open-circuit peak output voltage 6KV standard;

● Built-in power supply with multiple power options: AC220V, DC-48V/DC24V, etc., it supports AC+DC dual power backup mode.