Inquire Now
The Equipment supports 4*1000M Ethernet + 2*RS232/422/485/ or 4*Dry contact interface to the optical fiber converter. To achieve network + telephone + serial data + Dry contact 4 type interface in the same core Optical fiber transmission is widely used in a variety of industrial control card instrumentation and other occasions . Not only save fiber resources but also save fiber equipment, reduce the point of failure to facilitate the maintenance of equipment. 4*1000M Ethernet interface bandwidth for the wire speed 1000M.
- Product Search Guide: space = AND, | = OR, ! = NOT
4GE+2RS232 Fiber Mux (Desktop Tpye)
Model
FCP-G4R2/FCP-G4R2
Description :
The Equipment supports 4*1000M Ethernet + 2*RS232/422/485/ or 4*Dry contact interface to the optical fiber converter.
Overview
Features
◆Equipment to provide 4*1000M GE port; 2*serial data interface / 4*dry contact;
◆Voice port support FXO/FXS/2 Wire Audio/Magnet phone interface FXO port plug into PBX FXS port is connected to the user’s telephone;
◆FXO/FXS telephone interface support caller ID / reverse polarity billing / fax function;
◆Both sides of the device support FXO+FXS hybrid access;
◆RS232/RS485/RS422/TTL/Dry contact transmission channel flexible application;
◆Serial interface can be transmitted asynchronously from 300-115200 baud rate adaptive serial data;
◆4*GE, bandwidth wire speed 1000M, automatically adapt to 10/100/1000Mbps ,easy to upgrade the network;
◆ Ethernet interface supports full-duplex and half-duplex network communication with auto-negotiation capability MDI / MDI-X adaptive without manual adjustment;
◆A variety of power options: AC220V DC-48V / DC24V;
◆Telephone/Ethernet/serial-data interface with lightning protection lightning protection to IEC61000-4-5 short-circuit current wave 10/700μs open peak output voltage 6KV standard;
Parameters
Fiber
Multi-mode Fiber
50/125um, 62.5/125um,
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
Link budget: 16dBm
Single-mode Fiber
8/125um, 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
Link budget: 18dBm
Ethernet interface(100/1000M)
Interface rate: 100/1000 Mbps half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45 support Auto-MDIX
Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Specification
| Model | FCP-G4R2/FCP-G4R2 |
| Functional Description |
4*GE+2*Data Over Fiber，Desktop Type |
| Port Description |
One Fiber interface；4 *GE; 2 serial ports |
|
Power |
Power supply: AC180V ~ 260V；DC –48V；DC +24V Power consumption: ≤10W |
|
Dimension |
216X140X31mm(WXDXH) |
|
Weight |
1.5Kg/piece |
Application
Related Products
Documentation and project verification — FCP-G4R2/FCP-G4R2
Before ordering or wiring, confirm the exact model and configuration, interface pinout, optical or network compatibility, power input and installation conditions. Optional configurations are not interchangeable.
Browse FCTEL technical documents · Request the current model-specific datasheet and wiring diagram
Inquire Now
PRODUCT INQUIRY
Tell us about your application.
Share your devices, interfaces or quantity—our team will help you choose a suitable solution.
✓ Prompt response
↔ Technical guidance
✓ Confidential details
+ Custom requirements
We use your information only to respond to this inquiry.
