This device provides 384-channel phone, 4 ports 10/100/1000M Ethernet (wire speed 1000M), and 2 expansion interfaces (RS232/RS485/RS422 asynchronous data, switch signal).
The series equipment is the company developed the PCM optical fiber transmission for the large-scale integrated circuit on the base of the developed of optical fiber transmission Provide 384 * voice，4 * 10/100/1000M fast Ethernet （wire speed 1000M），2*expansion interface(RS232/RS485/RS422 asynchronous data、switch signal） Ethernet interface can exchange for each other, and VLAN division The working is reliable, stable, and low power consumption, high integration, small size, easy for installation and maintenance.
● Based on self-copyright IC
● The equipment for 4U 19 inch a total of the optical port plates with 16 function boards.
● Maximum configured to 384*Voice, if you want to configure SNMP Network management need to remove a 24* Voice board, Configuring 1*N E1 board needs to remove a 24 * call board too.
● 384Channel voice access, supports caller ID feature and reverse polarity billing functions
● Support FXO/FXS, EM2/4 audio, Magnet Telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user’s telephone
● Support various sites’ mutual number allocation function
● 4Channel Ethernet interface is switch interface, supports VLAN
● Ethernet interface rate is 10/100/1000M, duplex/half duplex adaptive
● Can command the remote interface loop back to maintain the circuit
● The transmission distance is up to 2-120Km without interruption
● AC 220V, DC-48V, DC24V can be optional
● DC-48V/DC24V power has a polarity automatic detection function, you can install the device without differentiation between positive and negative polarity.
● Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 8 / 20μs, open-peak output voltage 6KV standards.
Multi-mode Fiber
50/125um, 62.5/125um,
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)
Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
Link budget: 16dBm
Single-mode Fiber
8/125um, 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
Link budget: 18dBm
Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;
E1 Impedance: 75Ω (unbalance), 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation: 0~6dBm
Interface rate: 10/100/1000 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
Ring voltage: 75V
Ring frequency: 25HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
Ring detect voltage: 35V
Ring detection frequency: 17HZ-60HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
AD: 0dB
DA: -3.5dB
Two/Four-line Impedance: 600 Ohm
Return loss: 20 dB
Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
| Model | Model Number: FC2P-O384F4R2/FC2P-S384F4R2 |
| Functional Description | 4U rack mount multiplexer，384 * telephone，4*10/100/1000 Mbps Ethernet，E1，Console or SNMP,2*RS232/422/485，Two Fiber interface |
| Power |
Power supply: AC180V ~ 260V；DC –48V；DC +24V Power consumption: ≤300W |
| Dimension | 485(length) X 365(width) X195(height) mm(19 inch 4U Type) |
| Weight |
12.5Kg/Pcs(19 inch 4U Type) |
Tell us what you need. We can help with product selection and a quotation.
Online Message
Inquire Now
