8-Port Ethernet over E1 Converter

● Realize ethernet data transparent transmission in 1-8 E1 circuits;

● Realize the local and the remote device reset;

● Ethernet Interface is 100BASE-FX, support VLAN protocol;

● Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering function;

● Single channel lines rate is 1984Kbit/s, 8-channel Bandwidth is up to 15872Kbit/s;

● Support all sets of Ethernet Work Mode;

● CRC automatic alarm threshold can be set to isolate the poor quality transmission lines and cut off a single direction. When the 2M branch circuit one direction error rate exceeds the threshold, cutting off this direction the other direction is not affected; that is to say, both of the Ethernet direction transmission can be asymmetric;

● Allow 8-channel E1 transmission time delay difference 100ms. When the margin exceeds the allowed range, the system can automatically stop on the E1 the time delay is too large to send data;

● E1 interface conforms to ITU-T G.703, G.704 and G.823, not support the use of signal timeslot;

● E1 interface module with inter-set clock recovery circuit and HDB3 code circuit;

● Support E1 channel hot-plug in the device, and automatically detects the effective;

● Can support 8-channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available.