Product Category

Got any Questions? Call us Today!


Or leave us a message

Online Message

Managed 8FE to 1000base-X Media Converter

View : 547
Type : managed Ethernet switch
Description :

This series of products is industrial grade 8*100base-T to 1000base-X optical fiber conversion mainly used for optical fiber network long distance (20/40/60/80/100km) transmission.


This series of products is industrial grade 8*100base-T to 1000base-X optical fiber conversion mainly used for optical fiber network long distance (20/40/60/80/100km) transmission. This product  share the 1000M bandwidth each channel bandwidth can be set by Console (Ethernet interface can support VLAN into exchange namely logic) isolation; 1 Console port.
Ethernet switch chip+FPGA scheme based on OAM frame with remote management function support Console/WEB/Independent SNMP Manager and 2U can also be inserted with SNMP network 1*GE optical transceiver card energy management to the equipment in SNMP software.



Industrial Ethernet series designed for harsh and harsh industrial environments;
Equipment provides 8*FE electrical port 1*1000base-X port an optional Console / SNMP management port;
Electrical interface (RJ45 interface) support 10/100M adaptive full/half duplex mode MDI/MDI-X automatic detection;
Optical interface to support multi-mode dual-fiber single-mode dual-fiber single-mode single fiber three fiber transmission mode SC/ST/FC/LC interface optional;
With broadcast storm protection balance flow isolation conflict detection error and crash from the reset function suitable for video transmission and other large flow data applications;
Transceiver built-in 1MBits high-speed cache to avoid the IP camera in the monitoring screen rapidly changing the environment caused by the transmission screen stuck phenomenon;
Support VLAN long packet transmission can support IEEE802.1Q protocol with the switch to use the product to support up to 10K bytes of Ethernet packets;
Equipment for the Ethernet switch chip + FPGA program with remote OAM management frame function with 2U card with SNMP network management 1 1 optical transceiver card interconnection SNMP software can manage to the device; can also support the Console (CLI) / WEB / independent SNMP network management;
The network management real-time view and management of the local end and the remote Ethernet interface status and settings; equipment with power-down detection function can detect when the optical signal is lost when the peer device power or fiber unreasonable;
Support a wide range of 9-55V AC and DC power input;
Support internal isolation redundant dual power input;
Power supply support overload protection anti-reverse protection;
Meet the requirements of industrial four electromagnetic compatibility;
Super lightning protection function: anti-lightning anti-sensor high pressure anti-surge etc .;
No fan efficient cooling reduce repair time.


● E1 Interface
Interface Standard:      comply with protocol G.703;
Interface Rate:             n*64Kbps±50ppm;
Interface Code:            HDB3;
E1 Impedance:             75Ω (unbalance) 120Ω (balance);
Jitter tolerance:            In accord with protocol G.742 and G.823
Allowed Attenuation:   0~6dBm
● Ethernet interface (10/100M)
Interface rate:              10/100 Mbps half/full duplex auto-negotiation
Interface Standard:      Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector:                  RJ45 support Auto-MDIX
● Power
Power supply: AC180V ~ 260V;DC –48V;DC +24V
Power consumption: ≤10W
● Dimension          
Product Size: Mini Type    216X140X31mm(WXDXH)
Simple packaging:   274X193X84mm(WXDXH)
Piece Weight :    1.25KG 
● Working environment
Working temperature: -10°C ~ 50°C
Working Humidity:        5%~95 % (no condensation)
Storage temperature:   -40°C ~ 80°C
Storage Humidity:         5%~95 % (no condensation)



Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail