Managed Din-Rail 8 Port Gigabit Ethernet + 4-Port Gigabit Optical Industrial Switch with Bypass

This product adopts an industrial din-rail type. 8 GE electric ports+4 GE optical ports switch is a new generation of multi-service access network managed redundant Ethernet switch, with internal bypass protection function. It has high integration and rich functions. It has 8 GE electric ports and 4 GE optical ports, especially adapting to large flow occasions like video transmission.

It supports the layer-2 management protocols needed by perfect industrial switch application, supports ITU G.8032 redundant loop network protocol, and can be used in various network topologies structures like cascade mode, single ring, and tangent ring. The self-healing time is less than 20ms, to ensure a real-time and stable network. The switch adopts mature technical and open network standards, it adapts to environments of low and high temperature, high electromagnet interference, salt fog and shaking. It can meet the demands of the harsh environment in industrial sites, and provides a high-efficiency, reliable, and quick solution for industrial Internet of Things.

● Aluminum alloy shell, industrial din-rail design, great heat dissipation, anodizing process, IP40 protection grade, specially designed for the harsh industrial environment;

● Provide 8 GE electric ports, 4 GE optical ports, and two of the 4 GE optical ports are bypass FC optical ports, two of that are SFP optical ports;

● When the device is powered off, the two FC optical ports are pass-through ports. When the device is powered on, these two optical ports can be used as Gigabit optical Ethernet switching ports;

● FC optical port 20/40/60/80/100/120km is optional;

● Each electrical port or optical port supports the standard ERPS ring network protocol, and the self-healing time is less than 20ms;

● Support port bandwidth limitation, port flow control, and broadcast storm suppression;

● Support Web, CLI, and Telnet management functions;

● Power off alarm, loop alarm;

● Provide Console adjustment；

● Support to be POE（POE+) device；

● Management function：

1. Support CLI, WEB, and SNMP management mode

2. Support port speed limitation based on ingress/egress, support half-duplex back press flow control and 802.3X full duplex flow control

3. Support broadcast, multi-cast, unknown unicast storm suppression function

4. Support IEEE 802.1Q 4K VLAN, support QINQ

5. Support port mirror, support Syslog, support Ping command, etc.

6. Support COS, DSCP, 8 queues, support WRR, SP, WFQ Scheduling mode, strategy QOS

7. Support port traffic statistics, online update

8. Support STP/RSTP, MSTP, support EAPS, ERPS

9. Support IGMP Snooping V1/V2/V3, support GMRP

10. Support integration by hand, support static/dynamic LACP protocol

11. Support 1 channel relay alarm, support RMON management, TRAP alarm

12. Support DHCP Snooping, Option 82, support 802.1X

13. Support User classification management, support ACL to visit the control list

● Support  DDOS, support MAC filtering/banding based on port

● Ethernet interface with lightning protection, which is up to GB/T17626.5(IEC61000-4-5) short circuit current wave10/700μs, open circuit peak output voltage6KV standard;

● Support wide-range AC/DC input (9V-48V), support internal isolation, redundant dual power input, power with overload protection and reverse connection protection;

● Comply with the requirement of industrial 4-grade electromagnet compatibility;

● Super great lightning protection function: anti-lightning, anti-inductive high voltage, anti-surge, high-efficiency heat dissipation without a fan, reducing repair time

● IP40 shell protection grade, can withstand the test of harsh environments;

● Din railed installation or wall-mounted installation;

● Wide temperature type: working temperature -40℃~ +85℃;