Product Category

Got any Questions? Call us Today!

+8618758069661

service@fctel.com.cn

Or leave us a message

Online Message

E3/DS3/STS-1 To 4xFE Converter

View : 122
Type : E3(DS3 STS1) to 4xFE Converter
Description :

The interface converter) using large scale FPGA design, E3/DS3/STS-1 interfaces and four 4x10/100Base-T Ethernet interface converter, 10/100Base-T channels will be transferred to the switch, HUB, routers, bridges, or other device.

Overview

    The interface converter) using large scale FPGA design, E3/DS3/STS-1 interfaces and four 4×10/100Base-T Ethernet interface converter, 10/100Base-T channels will be transferred to the switch, HUB, routers, bridges, or other device.  This device is a high performance, adaptive remote Ethernet bridge. Its small size, low cost, very suitable for cost-sensitive bridging applications or as a LAN extender or slicer bitstream on infrastructure. Can automatically learn continuously connected LAN MAC address on the destination address of the frame and another LAN forwarding. On the TCP/IP protocol transparent, provide security for the communication network between the different interface devices, seamless connectivity. This equipment is widely used between WAN and LAN networking, monitoring field.

Product Photo

 

Features

Based on self -copyright IC

Integrated Transmitter, Receiver, and Jitter Attenuator for DS3, E3, and STS-1;

Have the function of E3/DS3/STS-1interface loop back check, avoid the converter crashed because of interface loop  return;

E3Interface Ethernet Bandwidth is 368Mbit/s,DS3 Interface Ethernet Bandwidth is 44.736Mbit/s,DS3 Interface Ethernet Bandwidth is 51.84Mbit/s

4Channel 10M/100M Ethernet interface can isolate each other to realize communication independently;

Ethernet interface supports10M/100M, half/full duplex auto-Negotiation and AUTO-MDIX (crossed line and  straightly  connected line self-adaptable );

Provide 2 clock types: E1 master clock and E1 line clock;

Have twoLoop Back Mode: E1 interface Loop Back (ANA)、Ethernet interface Loop Back(DIG); 

Provide 75 Ωunbalance coaxial cable,B3ZS/HDB3 decoding, and loss-of-signal monitoring.

AC 220V, DC-48V, DC+24V, DC Power and DC-48V/DC24V power has polarity automatic detection function, you can install the device without differentiation between positive and negative polarity.

 

Parameters

●E3/DS3/STS-1 interface

Interface Type: 10/100 Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector: RJ45, support Auto-MDIX

●Ethernet interface(10/100M)
Interface rate: 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
●Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)

Specifications

Model

FCC-E3F4(E3)

FCC-DS3F4(DS3)

FCC-STS1F4(STS-1)

Port Description

E3/DS3/STS-1 to 4*100Base-T Converter

Description

4 *10/100BASE-T ports; E3/DS3/STS-1 ports;

Power

Power supply: AC180V ~ 260V;DC –48V;DC +24V

Power consumption: ≤10W

Dimension

Product Size: desktop type 216X140X31mm (WXDXH),1.3KG/piece

Application

Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail