This industrial rail-type serial port server is IP40 protection grade, which is a serial port networking server that enables serial port devices to have networking capabilities immediately, and can centrally manage scattered serial devices, hosts, etc. through the network. This product supports 1-8 channels of RS-232/RS-422/RS-485 to 2 channels of 100M Ethernet, meeting the requirements of dual IP and dual MAC addresses/multi-network management or network backup, and can be used for 35mm rail type and wall mount installation method.

    The serial port server supports a variety of network protocols, such as TCP, UDP, ARP, ICMP, HTTP, DNS, DHCP, SNMP, Telnet, SSH and other protocols; it has complete management functions, supports access control, rapid configuration, online upgrade, etc.; The serial port supports 4-way TCP or UDP session connection, supports Modbus TCP, TCP Server, TCP Server, TCP Client, UDP Server, UDP Client, and other working modes; supports WEB access mode. In addition, the provided management and configuration tool based on the Windows platform can realize the immediate networking of serial devices through simple settings. The interface design of the network management system is friendly, the operation is simple and convenient, and it can bring you a good user experience.

    The hardware adopts fanless, low power consumption, wide temperature and wide voltage design. It has passed strict tests in line with industry standards, and can adapt to industrial field environments with strict EMC requirements. It can be widely used in PLC control and management, building automation, and healthcare automation. systems, measuring instruments and environmental dynamic monitoring systems, etc.

Can be used in many embedded network control applications:

– Industrial automation production

– Security access control: network access control, alarm equipment, infrared detection alarm, remote card reader

– Smart home equipment: smart home gateway, smart socket, smart switch

– Network IO Controller: Industrial Remote IO Input, Remote Relay Control

– Building intelligence and energy monitoring

– Medical monitoring equipment

●  Using ARM 9 processor, main frequency 300MHz processor, running Linux OS Openwrt system;

● Support 2-way 10/100M self-adaptive electrical Ethernet interface, provide dual IP and dual MAC addresses, to meet the needs of multi-network management or network backup;

● Ethernet supports 10/100Base-T adaptive Ethernet interface; supports auto-negotiation (Auto-Nego Full&half duplex), supports automatic cross-wire detection (MDI/MDIX);

● The serial port supports 300bps-150000bps wire-speed non-blocking communication;

● The serial data interface has two modes:

● Each channel provides one of three interfaces of RS-232/RS-485/RS-485, which can be arbitrarily configured at the factory;

● Each channel provides three interfaces of RS-232/RS-485/RS-485, and different interface modes can be set by dialing code on site;

● Support Modbus TCP, TCP Server, TCP Client, UDP Server, UDP Client, and other working modes;

● Complete the transparent conversion from Modbus-RTU to Modbus-TCP, and realize the reading of serial device data through the network;

● Support serial port status and serial port parameter monitoring, the communication status is clear at a glance;

● Support cross-gateway and cross-route communication; support virtual serial port drive access mode and automatic connection recovery function after network interruption;

● Flexible serial port data framing settings to meet various subcontracting needs of users;

● Support standard TCP/IP SOCKET application program access, TCP supports multi-connection, to meet the requirements of less than 4 users to monitor or manage serial devices at the same time;

● Support single-machine or multi-machine communication in UDP mode, satisfying multiple users to monitor or manage serial devices at the same time;

● Support Windows configuration tools, SSH, Telnet and WEB and other configuration forms, support SNMP network management;

● Support local and remote system firmware upgrade;

● Support a wide range of 9-55V AC and DC power input; support internal isolation, redundant dual power input;

●  The power supply supports overload protection and anti-reverse connection protection; it meets the requirements of industrial four-level electromagnetic compatibility;

● Super lightning protection function: lightning protection, anti-induction high voltage, anti-surge, etc.; no fan for efficient heat dissipation, reducing repair time;

● Anodized aluminum alloy shell, IP40 protection grade, can withstand the test of harsh environment; rail or wall-mounted installation;

● Wide temperature type: working temperature -40℃~ +85℃;

● All models have passed 100% oven test.

● 10/100M Ethernet interface  

Protocol:comply with IEEE 802.3ab, IEEE 802.3z

Rate: 10/100M adaptive, full duplex/half duplex adaptive

MAC address table: 4096 MAC addresses

Physical interface: RJ45, support Auto-MDIX

G.742 and G.823

● Serial interface

Standard

EIA/TIA-232 RS-232 (ITU-T V.28)

EIA/TIA-422 RS-422 (ITU-T V.11)

EIA/TIA-485 RS-485 (ISO/IEC8284)

Serial interface:

RS-422: TxD+ TxD- RxD+ RxD- GND

RS-485 4 wires: TxD+ TxD- RxD+ RxD- GND    RS-485 2 wires: A(corresponding TX+)   B(corresponding TX-) GND

RS-232: RXD TXD GND 

● Environmental indicators

Operating temperature: -40 ℃ – +80 ℃

Storage temperature: -40 ℃ – +85 ℃

Humidity: 0% -95% (non-condensing)

MTBF:> 100,000 hours