V.35 to Ethernet Converter | V.35 over IP Converter

This v.35 to ethernet converter is mainly used to transmit V.35 signal over the IP network. It has a V.35 port, 2 100Mbps Ethernet ports, a 100Mbps Ethernet optical port, and a console management port. It can connect TDM equipment and user Ethernet, without any impact on quality, for carriers and enterprises on a standard low-cost wireless or wired Ethernet/IP infrastructure. It assures connecting to the physical V.35 interface of any device seamlessly, and it can be used in a communication system based on V.35, such as LAN, WAN, MAN, and wireless networks.

● It provides console (CLI) and web management ports;

● It provides 1*V.35, 2*10/100Base-TX and 1*100Base-FX interface;

● Transparently transmitting V.35 signals over an IP network conforms to the relevant ITU-T V.35 regulations;

● The clock recovery adopts a unique clock algorithm technology, which has stable frequency restoration and low jitter and drift;

● 3 loopback functions are provided: Ethernet local loopback (ANA), V.35 local loopback (DIG), and remote V.35 loopback (REM);

● It has a pseudo-random code testing function, which makes it easy to use as a 2M error tester for line commissioning;

● V.35 interface supports hot-swapping and can be connected with both DTE and DCE devices;

● V.35 interface supports internal clock, external clock, and line clock when working;

● High transmission efficiency and low transmission delay. Ethernet packet length can be configured and supports jumbo frames. Support VLAN configuration;

● Support V.35 link loss indication function;

● It provides high transmission efficiency, with up to 90% bandwidth utilization;

● It supports online software and hardware upgrades for both local and remote devices through the web-based management interface;

● Multiple power supply options are available, including AC220V, DC-48V, and DC24V.

● 10/100M Ethernet Interface

Protocol: IEEE 802.3az, IEEE 802.1Q (VLAN)

Rate: 10/100M adaptive, full/half duplex fully adaptive

MAC Address Table Capacity: 4096 MAC addresses can be learned

Physical Interface: RJ45 seat supports auto mdix

● V.35 Interface 

Interface rate: 2048Kbps

Interface Standard: Compatible with V.35 Standard

Connector: DB25

Connect Mode: DCE

Clock Type: G.703 restored clock, Internal clock 

● Environmental Indicators

Operating temperature: – 10 ℃ – + 60 ℃

Storage temperature: – 40 ℃ – + 85 ℃

Working humidity: 0% – 95% (no condensation)

MTBF: ＞ 100000 hours