Inquire Now
This CAN fiber optic modem can realize the conversion of 1-2 CAN bus signals into optical signals for transmission on optical fibers, which can extend the communication distance of the CAN bus. At the same time, due to the use of optical fiber communication, it solves the problems of electromagnetic interference, ground loop interference and lightning damage, greatly improving the reliability, security and confidentiality of data communication. It can be widely used in various industrial control, process control and traffic control occasions.
- Product Search Guide: space = AND, | = OR, ! = NOT
Industrial Din Rail 1-2 ch CAN Bus Fiber Modem | Adam Module FCP-C1/2
Model
FCP-C1/2
Description :
Overview
Specifications
|
Model |
FCP-C1/2 |
|
Product Function Description |
Simultaneous transmission of 1-2 CAN bus data over fiber |
|
Function Ports Description |
1 fiber interface; 1~2 CAN bus interfaces, 1 USB B interface |
|
Power Supply |
DC9~55V |
|
Product Size |
(L × W × H) 72 * 125 * 26 mm Adam DIN Rail Type |
|
Weight |
0.25Kg / PCS |
● Fiber
Optical port: 1
Fiber: single fiber and dual fiber
Fiber interface: FC/SC/ST optional
Wavelength: 850nm/1310nm multimode; 1310nm/1550nm single mode
Transmission distance without relay: 20~120Km
Typical transmission power:
Single mode 1310/1550nm: ≥-9dBm
Multimode 850nm: -18dBm
Multimode 1310nm: -25dBm
Acceptance sensitivity range: -28dBm~- 40dBm
● CanBus Interface
Standard
Protocol: Complies with international CAN1.0, CAN2.0 standards
Rate: 0~1000Kbps
Physical interface: Industrial 5.08mm terminal
CAN definition: CANH, CANL, GND
● Electrical and Mechanical Feature
System power supply: AC7V～50V; DC9-55V;
Power consumption: ≤2W
Appearance structure: (length×width×height) 72*125*26mm Adam module
● Working Environment
Operating temperature：-40℃—+85℃
Storage temperature： -40℃—+85℃
Working humidity： 0%—95% (No condensation）
MTBF： ＞100,000 hour
Application
Features
● Integrated circuit based on independent intellectual property rights;
● Provides 1-2 CAN bus interfaces, 1 optical port, multi-mode fiber/single-mode fiber optional, multi-mode transmission 2KM, single-mode transmission 20KM, customizable transmission 120KM;
● This optical modem is protocol-based and supports various baud rates within CAN 0~1Mbps;
● Three configuration modes for CAN rate: CAN fixed baud rate, custom baud rate, adaptive baud rate,
CAN fixed baud rate can be configured with 15 commonly used baud rates through configuration software;
Custom baud rate is used when there is no required baud rate in the fixed baud rate list
Baud rate adaptive mode is used when the communication rate of the CAN device cannot be known
● The maximum number of nodes on the CAN interface is 128; The CAN interface speed complies with the international CAN1.0 and CAN2.0 standards;
● DC9-55V or AC7-50V wide-range power supply, the power supply has an automatic polarity detection function, and there is no need to distinguish between positive and negative poles during installation;
● DIN is provided 35mm rail installation or wall-mounted installation;
● CAN interface with lightning protection, lightning protection reaches GB/T17626.5 (IEC61000-4-5) short-circuit current wave 8/20μs, open-circuit peak output voltage 6KV standard.
Related Products
Inquire Now
PRODUCT INQUIRY
Tell us about your application.
Share your devices, interfaces or quantity—our team will help you choose a suitable solution.
✓ Prompt response
↔ Technical guidance
✓ Confidential details
+ Custom requirements
We use your information only to respond to this inquiry.
