+8618758069661 [email protected]
Product Search Guide: space = AND, | = OR, ! = NOT

Industrial 1–4 Port RS232/RS422/RS485 Serial Device Server with Dual Ethernet and SFP

View : 2,892
Inquire Now
Model FCT-1500
Description :

The FCT-1500 is a rugged 1–4 port RS232/RS422/RS485 serial device server with two Fast Ethernet ports and one SFP fiber port for cascading and long-distance industrial networking.

Overview

The FCT-1500 Series is a high-reliability industrial serial device server designed to connect legacy serial equipment to Ethernet in minutes. It supports 1–4 RS-232/RS-422/RS-485 ports, two 10/100 Mbps Ethernet ports and one 100 Mbps SFP fiber port in a switched architecture, allowing distributed serial devices to be centrally managed across copper or long-distance fiber networks.

Its fanless IP40 aluminum enclosure supports 35 mm DIN-rail and wall mounting. Every serial port supports up to four TCP/UDP sessions, Modbus RTU-to-TCP conversion, MQTT transparent transmission, virtual COM access, WEB management, SNMP and Windows configuration tools with remote firmware upgrades.

Rugged industrial protection: dual redundant 9–70 VDC inputs, reverse-polarity and overload protection, 2.5 kV serial isolation, 6 kV surge protection and 8/15 kV ESD protection support reliable operation from -40°C to +85°C.

FCT-1500 industrial serial device server installation and interface labels

FCT-1500 dual Ethernet SFP and serial interfaces

Features

  • Two switched 10/100 Mbps Ethernet ports plus one 100 Mbps SFP port with DDM support and device cascading.
  • 1–4 software-configurable RS-232, RS-422 or RS-485 serial ports; 300 bps to 921.6 kbps including custom baud rates.
  • Modbus RTU-to-Modbus TCP transparent conversion, MQTT pass-through and Modbus-to-JSON support.
  • TCP Server/Client, UDP Server/Client, DHCP, DNS, HTTP/WEB and SNMP.
  • Four TCP/UDP sessions per serial port, virtual COM driver, cross-router communication and automatic reconnection.
  • 2.5 kV serial isolation, built-in 120-ohm RS-485 termination and 6 kV surge protection.
  • Dual redundant 9–70 VDC inputs with overload, reverse-polarity and 6 kV surge protection.
  • Fanless IP40 aluminum housing, industrial EMC Level 4 and -40°C to +85°C operation.

Flexible Interfaces

  • 4 × software-selectable RS232/422/485
  • 300 bps–921.6 kbps
  • 2 × Fast Ethernet for cascading
  • 1 × SFP for long-distance networking

Network Protocols

  • TCP / UDP
  • Modbus RTU–TCP / MQTT
  • SNMP management
  • DHCP / DNS
  • HTTP / WEB

Industrial Reliability

  • Industrial EMC Level 4
  • -40°C to +85°C operation
  • IP40 protection
  • Surge and ESD protection
  • Fanless heat dissipation

Power Management

  • Dual redundant power inputs
  • 9–70 VDC input
  • Overload protection
  • Reverse-polarity protection
  • 6 kV surge protection

Management & Configuration

  • WEB management interface
  • Windows configuration tool
  • SNMP management
  • Remote firmware upgrade
  • Custom baud-rate scanning

Communication Capability

  • Four TCP/UDP sessions per port
  • Virtual COM driver
  • Cross-router communication
  • Automatic reconnection
  • Modbus RTU ↔ TCP conversion

Ordering Information

Model Configuration
FCT-1500-F2B1D2 2 × FE + 1 × SFP + 2 × RS485
FCT-1500-F2B1D4 2 × FE + 1 × SFP + 4 × RS485
FCT-1500-F2B1X4 2 × FE + 1 × SFP + 4 × RS422
FCT-1500-F2B1R4 2 × FE + 1 × SFP + 4 × RS232
FCT-1500-F2B1D2R1X1 2 × FE + 1 × SFP + 2 × RS485 + 1 × RS232 + 1 × RS422
FCT-1500-F2B1S4 2 × FE + 1 × SFP + 4 software-selectable RS232/422/485 ports

Specifications

Processor ARM Cortex-M4, 240 MHz
Ethernet 2 × RJ45 10/100Base-T(X), full/half duplex auto-negotiation; 1 × 100BASE-FX SFP; IEEE 802.3; Auto-MDIX; 4,096 MAC addresses; 4 kV isolation
Serial 1/2/3/4 ports; RS-232/RS-422/RS-485; 300 bps–921600 bps; custom baud rates; 2.5 kV isolation; 6 kV surge protection
Power Dual redundant 9–70 VDC; <5 W; overload and reverse-polarity protection; 4-pin 5.08 mm terminal; 6 kV surge protection
Environment -40°C to +85°C operating and storage; 0–95% RH non-condensing; MTBF >100,000 hours
Mechanical 133 × 120 × 40 mm; 0.65 kg; IP40 anodized aluminum; 35 mm DIN rail or wall mount

Solutions

Application 1: Cascade multiple FCT-1500 units through their dual Ethernet ports while using the SFP port for long-distance fiber transmission.

FCT-1500 serial server cascading and long-distance fiber application

Application 2: Deploy two units as a server/client pair to transport 1–4 serial channels through an existing Layer-2 network.

FCT-1500 server and client mode over a Layer-2 network

Parameters & Dimensions

Serial Pinout

RS-485: A (TX+), B (TX-), R and GND. RS-422: TXD+, TXD-, RXD+ and RXD-. RS-232: NC, RXD, TXD and GND.

EMC Compliance

  • IEC 61000-4-2 ESD: 8 kV contact / 15 kV air
  • IEC 61000-4-3 radiated immunity: 10 V/m, 80 MHz–1 GHz
  • IEC 61000-4-4 EFT: 4 kV power / 2 kV signal
  • IEC 61000-4-5 surge: 4 kV power / 4 kV signal
  • IEC 61000-4-6 conducted immunity: 10 V/m, 150 kHz–80 MHz

FCT-1500 product dimensions and views

FCT-1500 wall-mount installation dimensions

FCT-1500 DIN rail clip dimensions

Inquire Now

PRODUCT INQUIRY

Tell us about your application.

Share your devices, interfaces or quantity—our team will help you choose a suitable solution.

Prompt response Technical guidance Confidential details Custom requirements

We use your information only to respond to this inquiry.