+8618758069661 [email protected]
Product Search Guide: space = AND, | = OR, ! = NOT

Modular multi-service Fiber MUX

8,977 +2
Inquire Now
Model FC2PM-E16
Description :

This device is modular structure point-to-point optical transmission equipment with LCD display, uses the FPGA chips and easy to upgrade

Overview

 

This device is modular structure point-to-point optical transmission equipment with LCD display, uses the FPGA chips and easy to upgrade. The Main board provide 4 ethernet port and 2 AUX port which is for transmitting other data such as RS232/RS485/RS422,dry contact closure, two optical interface for optional 1+1 auto protection switch (APS).

     4 slots of tributary with variant plug-in modules which included 4xE1 channels module, 4/8/16 x FXO/FXS module and 2x Nx64K V.35 module.The maximum capacity will be up 4 plug-in modules which could be combinations with above modules.The high flexibility, performance, is the best solution for voice/data/video services in existed market.

Features

● rovides total 16 E1 transparent transmission capacity ;

● With char 16*2 LCD display and SNMP agent inside.

● Provide Console manage interface(RS232)

● Provideone hotline channel for option;

● Provide two SFP fiber interfaces, one as master, the other as slave, insuring uninterrupted service transmission.

● Provide two fiber interface 1+1 protect(APS)function ,and ALS(Automatic Laser Shutdown/Reduction)function

● Provide 4 slots plug-in modules:

● 4×unFramed E1 module(75Ω)/(120Ω)

● 4×Framed E1 module(75Ω)/(120Ω),any timesolts can be set

● 4×FXO/FXS/EM2-4/Magnet telephone module

● 8×FXO/FXS/2 line audio/Magnet telephone module

● 16×FXO/FXS/2 line audio/Magnet telephone module

● 2×V.35 (2.048M Fixed speed) module

● 2×V.35 (N*64K N=1-32) module

● 4×RS232/422/485 or 8x dry contact closure module

● 4*FE to E1 bridge(wire speed 2.048M) module

● Provide 4FE(wire speed 100M)Ethernet channel,support mutual negatiate, Ethernet bandwidth is set on base on multiple of 32K.;

● Ethernet port supports full/half duplex, 10M/100M auto-adaptable;

● Ethernet port supports VLAN function and has 4 devision mode for user selection;

● Ethernet package size support 1916 byte and 4 Ethernet port could be set seperately;

● Has complete alarm function and can monitor remote device status;

● Supports E1 loop from remote so as to detect and manage device conveniently;

● The combination AC220V and DC-48V for redundant

Parameters

  • Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

  • E1 Interface

  Interface Standard: comply with protocol G.703;
 Interface Rate: n*64Kbps±50ppm;
 Interface Code: HDB3;

 E1 Impedance: 75Ω (unbalance), 120Ω (balance);

 Jitter tolerance: In accord with protocol G.742 and G.823

 Allowed Attenuation: 0~6dBm

  • Ethernet interface(10/100M)

Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector: RJ45, support Auto-MDIX

  • FXS Phone Interface

Ring voltage: 75V

Ring frequency: 25HZ

Two-line Impedance: 600 Ohm (pick up)

Return loss: 40 dB

  • FXO Switch Interface

Ring detect voltage: 35V

Ring detection frequency: 17HZ-60HZ

Two-line Impedance: 600 Ohm (pick up)

Return loss: 40 dB

  • EM 2/4 Line

AD: 0dB

DA: -3.5dB

Two/Four-line Impedance: 600 Ohm

Return loss: 20 dB

  • Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model Model Number: FC2PM-E16
Functional Description LCD PDH, 4port ethernet,With 4  slots, with ALS function,Console and SNMP,1+1 Back up Optic fiber
Port Description 1+1 optical port, 4 multi-function slots, 4 ethernet interfaces,1*RS232 Console interface,1*SNMP Ethernet interface, one engineering order-wire telephone interface
Power

Power supply: AC180V ~ 260V;DC –48V;DC +24V

Power consumption: ≤10W

Dimension Product Size: 216X140X31mm(WXDXH)
Weight

3KG/PCS

Application

The motherboard provides:
      1. LCD display;
      2.4 Ethernet port;
      3.2- channel RS232 / 422/485 asynchronous channels port ;
      4.1 channel public telephone port
      5. SNMP network management
 
4 slot, supports mixed insertion, provide:
          u 4 × E1 module (75Ω) / (120Ω)
          u 4 × framing E1 module (75Ω) / (120Ω), you can set an arbitrary time slot
          u 4 × FXO / FXS / EM2-4 / magnet module
          u 8 × FXO / FXS /2 wire audio / magnet module
          u 16 × FXO / FXS /2 wire audio / magnet module
          u 2 × V.35 (2.048M fixed rate) module
          u 2 × V.35 (N * 64K N = 1-32) module
          u 4 × RS232 / 422/485 /8x dry contact closure module
          u 4 Ethernet bridge (rate 2.048M) module
As above, if you want to achieve 8E1 + 4FE + 32-way telephone (FXO / FXS) function, you can configure two 4E1 cards, two 16xFXO / S telephone cards

Documentation and project verification — FC2PM-E16

Before ordering or wiring, confirm the exact model and configuration, interface pinout, optical or network compatibility, power input and installation conditions. Optional configurations are not interchangeable.

Browse FCTEL technical documents · Request the current model-specific datasheet and wiring diagram

Inquire Now

PRODUCT INQUIRY

Tell us about your application.

Share your devices, interfaces or quantity—our team will help you choose a suitable solution.

Prompt response Technical guidance Confidential details Custom requirements

We use your information only to respond to this inquiry.