● Optic Fiber
Optical port: 1, 2 (1+1 optical backup)
Optical port rate: 1.25G
Optical fiber: single fiber and double fiber
Fiber Interface: FC/SC/ST/LC (SFP)
Wavelength: 850nm/1310nm multimode; 1310nm/1550nm single mode
No relay transmission distance: 20~120Km
Typical transmit power:
Single mode 1310/1550nm: ≥-9dBm
Multimode 850nm: -18dBm
Multimode 1310nm: -25dBm
Acceptable sensitivity range: -28dBm~- 40dBm
●E1 Interface
Device interface: complies with G.703
Rate: 2048Kb/s ± 50ppm
Code: HDB3
Impedance: Unbalanced 75Ω/balanced 120Ω (unbalanced with coaxial interface adapter, can be adapted to 75-2/3 coaxial cable)
Jitter characteristics: in accordance with G.742, G.823
Allowable attenuation of input port: 0~6dBm
● 10/100M Ethernet Interface
Protocol: IEEE 802.3 compliant, IEEE 802.1Q (VLAN)
Rate: 10/100M adaptive, full/half duplex fully adaptive
MAC address table: Can learn 4096 MAC addresses
Physical interface: RJ45 seat, support Auto-MDIX
● FXS User Voice Port
Ringing voltage: 75V
Ringing frequency: 25Hz
Two-wire input impedance: 600Ω (off-hook)
Return loss: 20dB
● FXO Relay Interface
Ring detection voltage: 35V
Ringing detection frequency: 17Hz-60Hz
Two-wire input impedance: 600Ω (off-hook)
Return loss: 20 dB
● E&M 2/4 Line Interface
E&M type: TYPE V
E line maximum current: 22mA; saturation voltage: 3V
M line constant current: 7mA; minimum detection current: 5mA
AD gain: 0dB;
DA gain: 0dB
2/4 line input impedance: 600Ω
● Magnet Phone Interface
Ringing voltage: 75V
Ringing frequency: 25Hz
Two-wire input impedance: 600Ω (off-hook)
Return loss: 20dB
● Electrical and Mechanical Properties
System power supply: AC180V~260V; DC–48V; DC+24V
(Supports dual power supply redundant backup)
Power consumption: ≤5W
Appearance structure: 485(length)X200(width)X45(height)mm 19 inches 1U rack type
Weight: 3.8Kg/set
● Working Environment
Working temperature: -10 ° C – +60 ° C
Storage temperature: -40 ° C – +85 ° C
Working humidity: 0% – 95% (no condensation)
MTBF: >100,000 hour