16 Channel 4K 60HZ HDMI to Fiber Converter

The 16-channel 4K 30HZ HDMI 2.0 to fiber converter supports 4K resolution and 18G high-speed video bandwidth. It is used for communication with LCD screen and camera pan/tilt, and it can also be used for the long-distance transmission of touch screens. It has low power consumption, long-distance transmission, plug-and-play, strong compatibility, and can achieve a more accurate display.

● All full gold anodized aluminum 19-inch 1 Urack type;

● Video bandwidth 18 Gbps, transparent transmission without compression without delay;

● Support HDMI 1.4/2.0 b and HDCP 1.4/2.2 and 3D video signal transmission, the highest resolution: 4096 x 2160 @60 Hz 4:4:4;

● Automatically identify and configure the various display modes;

● Can take independent analog audio interface;

● HDMI interface built-in ESD protection circuit, can effectively prevent electrostatic damage;

● Installation: simple and convenient, plug-and-play, without setting;

● Multimode fiber 300 meters, 10 to 80 km single-mode fiber long-distance transmission;

● Optical fiber transmission, no need driver, compatible with any system, plug-and-play;

● AC220 power supply, or DC-48V/+24V power supply, can be dual power supply AC+AC, AC+DC, DC+DC backup power supply.

● Fiber Port  

Optical port: 1

Optical Fiber: Single fiber

Fiber interface: FC

Wavelength: 1310nm-1610nm Single mode

Relay-free transmission distance: 0~80Km

Typical transmit power: single mode 100uw — 0.93mw

● HDMI Interface

● Audio Port     

Signal level: 0.5～4Vp-p

Input/Output Impedance: 600Ω (unbalanced or balanced)

AD/DA bit width: 24Bit

Sampling frequency: 128K

Bandwidth: 20Hz～20KHz

Total harmonic distortion:   <1%

Signal to Noise Ratio (SNR): ＞85dB

Physical interface: 3.5mm

● Working Environment   

Working temperature: -10 ° C – +60 ° C

Storage temperature: -40 ° C – +85 ° C

Working humidity:    0% – 95% (no condensation)

MTBF: >100,000 hours