Inquire Now
This series of products are Ethernet IEEE802.3 media converters, which can realize the conversion between 8*10/100/1000base-T twisted pair and 1000base-FX optical fiber media or extend network transmission, and are mainly used for long-distance optical fiber networks ( 20/40/60/80/100km) transmission. This product provides 1 Gigabit optical port and 8 Fast Ethernet electrical ports. With perfect alarm function, the whole machine is stable and reliable, low power consumption, high integration, and small size.
- Product Search Guide: space = AND, | = OR, ! = NOT
8FE to 1000base-fx Media Converter (Power Internal)
Model
Contact us
Description :
This series of products are Ethernet IEEE802.3 media converters, which can realize the conversion between 8*10/100/1000base-T twisted pair and 1000base-FX optical fiber media or extend network transmission
Overview
Features
◆ International standard: IEEE 802.3z 100base-X 802.3ab 1000base-T;
◆ With anti-crash monitoring automatic reset function, suitable for heavy load applications such as high-definition network cameras;
◆ Electrical interface (RJ45 interface) supports 10/100M adaptive, full/half duplex mode, MDI/MDI-X automatic detection;
◆ The optical interface supports three optical fiber transmission modes: multimode dual fiber, single mode dual fiber, and single mode single fiber, SC/ST/FC/LC interface is optional;
◆ It has functions such as broadcast storm protection, flow balance, conflict isolation, error detection and crash self-reset, which is suitable for large-flow data applications such as video transmission;
◆ The transceiver has a built-in 1MBits high-rate buffer, which can avoid the freezing of the transmission picture caused by the IP camera in an environment where the monitoring picture changes rapidly;
◆ Supports the transmission of VLAN ultra-long data packets, which can be matched with switch products that support IEEE802.1Q protocol, and supports Ethernet packets up to 9K bytes;
◆ Ethernet interface with three-level lightning protection, anti-radar to GB/T17626.5 (IEC61000-4-5) short-circuit current wave 8/20μs, open-circuit peak output voltage 6KV standard;
◆ A variety of power supply options: AC220V, DC-48V/DC+24V/ DC+12V, etc.;
Parameters
Ethernet UTP Interface
Interface rate: 10/100M, half/full duplex auto-negotiation Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
Optical interface
Wave Length: 1310nm, 1550nm
Interface rate: 1000 M, half/full duplex
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Capability: 4096
Connector: FC/SC
Fiber Transmission Distance is limited by optical circuit loss and additional loss as a result of connectors, fittings and patch panel.Transmission distance may also be limited by fiber optic bandwidth.
Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation) Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Specification
| Functional Description | 1-8 channel FE ethernet port fiber media converter, power internal |
| 8 FE Ethernet interfaces; one GE optical Ethernet interface | |
|
Power |
Power supply: AC180V ~ 260V；DC –48V；DC +24V Power consumption: ≤10W |
|
Dimension |
Dimensions: 216mm (length) x 140mm (width) x 31.0mm (height) |
|
Weight |
1 .4kg/set |
Application
Related Products
Documentation and project verification
Before ordering or wiring, confirm the exact model and configuration, interface pinout, optical or network compatibility, power input and installation conditions. Optional configurations are not interchangeable.
Browse FCTEL technical documents · Request the current model-specific datasheet and wiring diagram
Inquire Now
PRODUCT INQUIRY
Tell us about your application.
Share your devices, interfaces or quantity—our team will help you choose a suitable solution.
✓ Prompt response
↔ Technical guidance
✓ Confidential details
+ Custom requirements
We use your information only to respond to this inquiry.
