Product Category

Got any Questions? Call us Today!

+8618758069661

service@fctel.com.cn

Or leave us a message

Online Message

Managed Din-Rail 6-Port Gigabit Ethernet + 2-Port Gigabit Ethernet/SFP Combo + 2-Port 10G SFP Industrial Switch

View : 321
Type : Managed Din Rail Industrial Switch
Description :

The switch provides 2 10G SFP optical ports, 6 1G Ethernet interfaces, and 2 1G COMB interfaces (2 1G ethernet or 2 1G optical multiplexing).

Overview

This switch adopts an industrial redundant ring network design, with 2 fiber optic ports on each device used to form a ring network through a cascade connection. The industrial redundant ring network design aims to achieve stability, reliability, and real-time data transmission in harsh environments. Its working principle is to form a physical ring structure, with the network signal working in a chain-like structure. Once a node of the transmission cable breaks, the device will automatically switch to the backup line to continue data transmission with minimal delay. The redundant ring network structure not only reduces the risk of data signal transmission but also simplifies engineering installation and reduces engineering costs.

 

The switch provides 2 10G SFP optical ports, 6 1G Ethernet interfaces, and 2 1G COMB interfaces (2 1G ethernet or 2 1G optical multiplexing). It provides WEB network management and supports various Layer 2 management protocols required for industrial switches. It also supports ITU-T G.8032 (ERPS) redundant ring network protocol, with a self-recovery time of less than 20ms, ensuring network real-time performance and stability.

Features

● The switch is designed with industrial DIN rail mounting design, specifically tailored for harsh industrial environments.

● It is equipped with 2 10G SFP optical ports, 6 1G Ethernet interfaces, and 2 1G COMB interfaces (2 1G ethernet or 2 1G optical multiplexing).

● With a cache of 4Mbit, it can smoothly transmit 4K videos.

● The 2 10G SFP optical ports support standard ITU-T G.8032 (ERPS) ring network protocol, with a self-recovery time of less than 20ms.

● It supports IEEE802.3/802.3u/802.3ab/802.3z/802.3x store-and-forward mode.

● The device supports 60G backplane bandwidth, a large switching cache, and ensures all port line-speed forwarding.

● VLAN supports IEEE 802.1Q 4K VLAN and supports QINQ.

● Management functions: CLI, WEB, and SNMP management methods.

● It can support POE (POE+) devices.

● The Ethernet interface has lightning protection, and it can prevent lightning from reaching the GB/T17626.5 (IEC61000-4-5) short-circuit current wave 10/700μs and open-circuit peak output voltage 6KV standards.

● It comes with a WEB management platform that can perform online software upgrades, and the host can manage the working status of each slave device.

● It supports a wide range of AC/DC inputs (9V-48V) and supports internal isolation and redundant dual power input. The power input also supports overload protection and reverse connection protection.

● It meets the requirements of industrial electromagnetic compatibility.

● It has strong lightning protection capabilities, preventing lightning strikes, resisting induced high voltage, and preventing surges. It has a fanless design for efficient heat dissipation, which reduces repair time.

● The IP40 protection level of the shell can withstand the test of harsh environments and can be installed on a rail or wall-mounted.

● Working temperature range: -40°C to +85°C.

 

 

Parameters

● Fiber

Fiber ports: 4

Fiber type: single/dual fiber

Fiber interface: LC: SFP (Gigabit), SFP+ (10 Gigabit)

Wavelength: 850nm/1310nm (multi-mode), 1310nm/1550nm (single-mode)

Transmission distance without relay: 0~80Km

Typical transmission power: 0.1mW – 0.93mW (single-mode)

 

● 10/100/1000M Ethernet Interface

Protocol: compliant with IEEE 802.3ab and IEEE 802.3z

Rate: 10/100/1000M adaptive, full/half duplex auto-negotiation

MAC Address Table: can learn up to 4096 MAC addresses

Physical interface: RJ45 connector, supports Auto-MDIX

 

● Ethernet POE Features

PoE standard: IEEE 802.3af/at

PoE type: end-span (optional mid-span)

PoE port characteristics: port output power of 15.4W/25.5W

PoE power transmission lines: 1/2+ and 3/6- pairs (optional 4/5+ and 7/8- pairs)

 

● Environmental Indicators

Operating temperature: -40°C to +85°C

Storage temperature: -40°C to +85°C

Operating humidity: 0% to 95% (non-condensing)

MTBF: greater than 100,000 hours

Specifications

Product Model
FCM-G6C2W2
Functional Description
6 *10/100/1000M ports, 2 combo ports, 2*10G optical Ethernet switch, din rail or wall mounted
Port Description
6 Gigabit Ethernet ports + 2 gigabit combo port + 2 10G optical ports
Power Supply
Redundant dual power input, support wide range AC / DC input (9-55v DC, 48v-55v DC in POE), power consumption < 15W
Overload protection: support; reverse protection: support; redundancy protection: support
Access terminal: 4-core 5.08mm spacing plug-in terminal
Dimension
133X120X50mm (WXDXH)
Weight
1.1KG/Pcs

Application

application of switch

                   

Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail