+8618758069661 [email protected]
Product Search Guide: space = AND, | = OR, ! = NOT

Industrial Din Rail Power Supply(AC220V to DC24V8A (with power factor adjustment) FCP-2408G

2,127 +10
Inquire Now
Model FCP-2408G
Description :

Features

●  IP40 protection level, thick heat dissipation aluminum alloy anodized process shell, can withstand the test of harsh environment;

●  With digital tube display voltage, convenient on-site voltage adjustment and service activation.

●  1 power supply specification: 24V8A 192W full power output, small temperature rise.

●  With power factor adjustment (PF), PF>0.9.

●  Designed according to safety regulations, isolation withstand voltage greater than 1500Vac.

●  Designed with reference to EMC requirements, strong anti-interference ability.

●  Complete protection functions: output overcurrent, overload, short circuit protection.

●  Lightning protection function, 6KV lightning protection, can resist inductive high voltage, surge protection, etc.;

●  Fanless and efficient thick heat dissipation aluminum alloy heat dissipation, reducing repair time;

●  IP40 shell protection level, can withstand the test of harsh environment;

●  DIN 35mm rail or wall-mounted installation;

●  Wide temperature type: working temperature -40℃~ +85℃;

●  Full load high temperature burn-in, 100% aging test;

Parameters

Electrical Parameters & Specifications

Parameter

Model

FCP-2408G

Output

 

 

 

 

 

 

 

 

Voltage

24V

Current

0-8A

Rated Power

192W

Voltage Ripple (noise)

50mVp-p

Power Factor(PF)

≥0.9

Line Regulation

±0.3%

Load Regulation

±1%

Work Efficiency

>=91.7%

Start-up & Rise Time

1500ms,30ms/220Vac;2500ms,50mS/110Vac(At full load)

Input

 

 

 

Voltage Range

90vc–264Vac;127VDC–370VDC

Alternating Current

0.96A/220 volt,1A/110 volt

Frequency Range

47-63Hz

Lightning Strikes & Surge

6KV lightning protection, surge current: cold start <40A/230VAC

Protect

 

 

Output Short Circuit

Hiccup mode, output can be automatically restored after fault is cleared

Output Over Current

Rated output current 130%-200%

Output Overload

Rated output power 130%-200%

Environment

 

 

 

 

 

Operating Temperature

-40℃—+85℃

Working Humidity

20-90% RH (No condensation)

Storage Temperature

-40℃—+85℃

Storage Humidity

10-95% Relative humidity

Vibration

10-500Hz, 2G 10min/cycle, 60min each for X, Y and Z axis

MTBF

>100,000 hours

Specification

 

Dimensions (L x W x H)

133mm*110mm*50mm

Weight

0.96kg

Remark:

1.Unless otherwise specified, all specifications and parameters are measured at 220Vac input, rated load, and 25℃ ambient temperature.
2.Voltage noise measurement method: Use 30cm double-stripe wire to connect 1 0.1uF and 1 47uF capacitor in parallel, and measure with a bandwidth of 20MHz.
3.Accuracy: includes setting error, linear adjustment rate and load regulation
4.Linear regulation rate measurement method: Under the condition of rated output power, adjust the input voltage within the full range and measure the output voltage change rate.
5.Load regulation rate measurement method: Measure the output voltage change rate when the output current is adjusted within the full range.

Product Size

Documentation and project verification — FCP-2408G

Before ordering or wiring, confirm the exact model and configuration, interface pinout, optical or network compatibility, power input and installation conditions. Optional configurations are not interchangeable.

Browse FCTEL technical documents · Request the current model-specific datasheet and wiring diagram

Inquire Now

PRODUCT INQUIRY

Tell us about your application.

Share your devices, interfaces or quantity—our team will help you choose a suitable solution.

Prompt response Technical guidance Confidential details Custom requirements

We use your information only to respond to this inquiry.