Product Search Guide: space = AND, | = OR, ! = NOT

32Ch Telephone Mux | SNMP | Integrated 6U Rack-mount

View : 2,299

Inquire Now

Model FCP-O32E4F4pG2p

Description :

This is a point to multi-point device developed by our company, based on the E1 line transmission special super scale integrated circuit.

Overview

This is a point to multi-point device developed by our company, based on the E1 line transmission special super scale integrated circuit. The slave end is a 6U rack, which can be plugged into 13 service cards. It also can plug in SNMP network management, realizing the SNMP integrated management.

Each multi-service fiber multiplexer card provides 32 telephone ports, 4 E1 ports, 4 FE ports, 2 GE ports, and 6 Ethernet electric ports which have independent bandwidth. The total bandwidth of 6 channels of Ethernet is 2400M, and each channel of the Ethernet signal is totally physically isolated. The device also provides 2 SFP slots for 1+1 optical backup. The internal circuit of the device adopts a fully digital circuit, with stable and reliable working, low power consumption, high integration, small size, and easy installation and maintenance.

Features

●The total bandwidth of the integrated circuit fiber line based on independent intellectual property rights is 3.125G;

●6U 13-slots frame can be plugged in at most 13 multi-service cards; available for SNMP network management;

●E1interface complies with 703, adopts full digital clock recovery and smooth lock frame technology;

●4channels of 10/100M Ethernet, full/half duplex is totally self-adaptive. Each Ethernet electric port has independent 100M bandwidth physical isolation；

●2 channels of 10/100/1000MEthernet; full/half duplex is totally self-adaptive. Each channel has independent 1000M bandwidth physical isolation;

●100M and 1000M Ethernet support the transmission of VLAN super-long data packets, support use with the switch machine under IEEE802.1Q protocol, support the maximum packet length up to 10240 bytes;

●With Ethernet loop back protection function(when optical line loopback, Ethernet data will not be looped back, which protects from Ethernet clashes.

●32channels of voice access, support caller ID function/reverse polarity billing/fax function; telephone supported mutual dialing function of both side

●Voice port supports FXO/FXS/2 line audio/magnet telephone port, FXO port is connected to program switch, and FXS port is connected to user’s telephone;

●The device with power failure detection function, can detect that the opposite end device port is off or optical fiber is not connected when optical signal loss;

●The transmission distance of the optical port is up to 80km, without relay; provide 1+1 optical port backup function to ensure the service is never interrupted;

●Various power options: AC220V、DC-48V, etc. Support dual power.

Parameters

●Optical fiber

Optical port：1，2（1+1 optical backup）

Rate：3.125G
fiber： single fiber /dual fiber

Interface： FC/SC/ST/LC(SFP)

Wavelength：850nm/1310nm multi-mode；1310nm/1550nmsingle mode

Transmission distance without relay：20~120Km

Typical transmitting power:

Single mode1310/1550nm：≥-9dBm

Multi-mode 850nm：-18dBm

Multi-mode1310nm: -25dBm

range of receiving sensitivity：-28dBm~- 40dBm

●E1 interface

Interface： comply with G.703

Rate： 2048Kb/s±50ppm

Code type： HDB3

Impedance： unbalanced 75Ω/balanced 120Ω(the unbalanced will match coaxial interface adapter, can adopt to 75-2/3 coaxial cable)

Jitter feature： meet the G.742、G.823

Input allowed attenuation：0～6dBm；

●10/100M Ethernet interface

protocol: comply with IEEE 802.3, IEEE 802.1Q(VLAN)

Rate：10/100M self-adaptive, full/half duplex completely self-adaptive

MAC address capacity：4096 MAC addresses

Physical port：RJ45, support Auto-MDIX

●10/100/1000M Ethernet interface

Protocol: comply with IEEE 802.3ab, IEEE 802.3z

Rate：10/100/1000M self-adaptive, full/half duplex self-adaptive

MAC addresses capacity：4096 MAC addresses

Physical port: RJ45, support Auto-MDIX

●FXS user telephone interface

Ring voltage： 75V

Ring frequency： 25Hz

2 line input impedance：600Ω(pick up)

Return loss： 20dB

●FXO relay interface

Detect ring voltage：35V

Detect ring frequency：17Hz-60Hz

2 line input impedance：600Ω(pick up)

Return loss： 20 dB

●Magnet telephone interface

Ring voltage：75V

Ring frequency：25Hz

2 line input impedance：600Ω(摘机)

Return loss： 20dB

●Electric and machine feature

Power ： AC180V～260V；DC–48V；DC+24V

(support dual power backup)

Power consumption： ≤5W

Outer structure：485(L)X200(W)X45(H)mm 19inches 1U rack

Weight： 3.8Kg/piece

●Environmental indicator

Working temperature：-10℃—+60℃

Storage temperature：-40℃—+85℃

Working humidity：0%—95%(no condensation）

MTBF：＞100,000 hours

Specification

Model	FCP-O32E4F4pG2p
Function description	Transmitting 32 channels of telephone（FXO/FXS/2 line audio），4 channels of E1（75Ω or 120Ω），4 channels of 10/100M Ethernet(physical isolation) and 2 channels of 10/100/1000M Ethernet(physical isolation. Provide SNMP network management, and 1+1 optical backup.
Service port description	2 optical ports(1+1 optical backup；32 telephone ports；4 E1 ports；4 100M Ethernet port; 2 1000M ports; 1 SNMP port
Power	AC220V or DC-48V（optional），support power redundant backup
Size	(L×W×H) 485250267mm 6U rack
Weight	10.2Kg/piece