● This device features an industrial rail-mounted design, specifically engineered for harsh industrial environments.
● It provides 2 fiber optic paths that can automatically switch to ensure communication is maintained in the event of a line failure.
● It supports multiple fiber optic network structures, including point-to-point, star, chain, and redundant ring, and can be combined to form more complex network topologies.
● The device can automatically shut down and restart in the event of a system crash.
● It provides 4 100Mbps Ethernet interfaces, 4 100Mbps optical interfaces, and 2 Gigabit optical interfaces, giving the network a total transmission bandwidth of 1000Mbps.
● It has a built-in 1Mbit MP-SSRAM high-speed cache with a non-blocking design and a maximum backplane bandwidth of 32GBit/S.
● Based on FPGA+ARM architecture, the device can quickly establish a self-healing ring network, supporting FC-Ring redundant ring networks with a self-healing time of less than 20ms.
● It supports the transmission of VLAN frames with an extended data packet size of up to 10K bytes, and can be used with switches that support the IEEE802.1Q protocol.
● It features functions such as broadcast storm protection, flow balance, conflict isolation, and error detection.
● The 10/100Mbps interfaces are fully adaptive, with automatic MDI/MDI-X adjustment.
● The Ethernet and serial interfaces are equipped with lightning protection, and can withstand short circuit current waves of 8/20μs and open circuit peak output voltage of 6KV according to GB/T17626.5(IEC61000-4-5) standards.
● It offers 2 optional RS232/485/422 interfaces and supports three types of data interfaces. The RS232 interface supports 3-wire RS232 (TXD, RXD, GND).
● The RS232/485/422 channels can transmit asynchronous serial data with a baud rate range from 0 to 115200bps.
● The switch comes with a Console (CLI) network management and WEB management platform, allowing for online software upgrades. The host can also manage the operational status of each slave device.
● It supports a wide range of DC inputs (9V-48V), with internal isolation and redundant dual power inputs that support overload protection and reverse connection protection.
● It features strong lightning protection capabilities, is resistant to lightning strikes, can withstand induction high voltage, and can prevent surges. It has efficient fanless cooling, reducing repair time.
● The anodized aluminum alloy housing has an IP40 protection level and can withstand the test of harsh environments.
● It can be installed on a rail or wall.
● Working temperature -40°C to +85°C.
Inquire Now
