8 Channel 4K HDMI 1.4 to Fiber Converter

The 4K 30HZ HDMI 1.4 fiber converter supports 8-channel 4K resolution HDMI signal high-speed video bandwidth. It uses a single fiber to extend the HDMI signal, speakers, and microphone. It supports EDID real-time return, which is used for communication with LCD screen and camera pan/tilt, and can also be for the long-distance transmission of touch screen. It features low energy consumption, long-distance transmission, plug-and-play, strong compatibility, and can achieve a more accurate display.

● All-aluminum and all-gold anodized 19-inch 1U rack mount;

● The device is paired and used, the video signal of the local end is input, and the video signal of the opposite end is output; 

● The transmission rate of each HDMI-compatible video is 10G optical fiber, which is truly uncompressed and transparent transmission without delay;

● Support HDMI 1.4, HDCP v1.4 high-definition and 3D video signal transmission, the highest resolution: 4096×2160@30HZ;

● Can reverse EDID, and support HDCP content protection;

● Automatic identification and configuration of various display modes;

● Each channel of video can bring one channel of independent analog audio;

● The HDMI interface has a built-in ESD protection circuit, which can effectively prevent electrostatic damage;

● AC220 power supply, also DC-48V/+24V power supply.

● Fiber

Optical port: 1

Optical fiber: single fiber

Fiber Interface: FC

Wavelength: 1310nm-1610nm single mode;

No relay transmission distance: 0~80Km

Typical transmit power: single mode 100uw — 0.93mw

● Video

● Audio

Signal level: 0.5～4Vp-p

Input/Output Impedance: 600Ω (unbalanced or balanced)

AD/DA bit width 24Bit

Sampling frequency 128K

Bandwidth: 20Hz～20KHz

Total harmonic distortion: <1%

Signal to Noise Ratio (SNR): ＞85dB

Physical interface: 3.5mm

● Environmental Indicators

Working temperature: -10 ° C – +60 ° C

Storage temperature: -40 ° C – +85 ° C

Working humidity: 0% – 95% (no condensation)

MTBF: >100,000 hours