Industrial Unmanaged Fast Ethernet Fiber Media Converter

This device is an industrial-grade 1-port 100Base-T to 100Base-FX fiber converter, which is designed for long-distance (20/40/60/80/120 kilometers) transmission in fiber optic networks. It features 1 100Mbps fiber port and 1 100Mbps Ethernet copper port. It is equipped with comprehensive alarm functions and offers stable and reliable operation, low power consumption, high integration, and a compact form factor.

● This device is designed specifically for harsh industrial environments.

● The device provides 1 100Mbps Ethernet electrical port and 1 100Mbps optical port.

● The ethernet interface (RJ45) supports 10/100Mbps auto-negotiation, full/half duplex mode, and MDI/MDI-X auto-detection.

● The optical interface supports multi-mode dual-fiber, single-mode dual-fiber, and single-mode single-fiber transmission modes, with optional SC/ST/FC/LC interfaces.

● It has a built-in 512Kbits high-speed cache to prevent video transmission stuttering caused by rapid changes in monitoring scenes.

● It supports VLAN transmission of oversized data packets and can be used in conjunction with switches that support the IEEE 802.1Q protocol, supporting Ethernet frames with a maximum size of 1916 bytes.

● It supports internal isolation and redundant dual power inputs.

● It accepts a wide range of power inputs, from 9V to 55V AC and DC.

● The power supply has overload protection and reverse connection protection.

● It complies with industrial EMC requirements.

● It has strong lightning protection capabilities, including protection against lightning strikes, high voltage induction, and surges.

● The device features fanless high-efficiency heat dissipation, reducing repair time.

● The housing is made of anodized aluminum alloy and has an IP40 protection rating, capable of withstanding harsh environmental conditions.

● It can be installed on a DIN rail or wall-mounted.

● It is designed for wide temperature ranges, from -40°C to +85°C.

● The device has passed 100% burn-in testing and has a 5-year warranty.

● Fiber

Fiber Type: Single/Dual fiber

Fiber Interfaces: FC/SC/ST/LC (SFP)

Wavelength: 850nm/1310nm (Multi-mode); 1310nm/1550nm (Single-mode)

Non-Relay Transmission Distance: 20~120km

Typical Transmit Power:

Single-mode 1310/1550nm: ≥-9dBm

Multi-mode 850nm: -18dBm

Multi-mode 1310nm: -25dBm

Receive Sensitivity Range: -28dBm to -40dBm

● Ethernet Interface (10/100M)

Protocol: IEEE 802.3, IEEE 802.1Q (VLAN)

Rate: 10/100Mbps adaptive, full/half duplex auto-negotiation

MAC Address Table: Supports up to 4096 MAC addresses

Physical Interface: RJ45 connector, supports Auto-MDIX (Auto-crossover)

● Working Environment

Working temperature: -40°C ~ 85°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 90°C

Storage Humidity: 5%~95 % (no condensation)