Inquire Now
This device provides 16-channel telephone, 8-channel E1 interface, 4-channel 10/100M Ethernet interface (Wire Speed 100M), and 4 expansion interface. The Ethernet interface is the switch interface, which can support VLAN. 4 expansion interfaces can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, voice signal, 2/4 wire E&M audio signal, dry contact signal, and Ethernet signal (Bandwidth 2M).
- Product Selector Search guide: Product names first; space = AND, | = OR, ! = NOT
16Voice+8E1+4FE+4*RS232/422/485 Fiber Multiplexer
Model
FCP-O16E8F4R4/FCP-S16E8F4R4
Description :
This device provides 16 channels telephone, 8 channels E1 interface, 4 channels 10/100M Ethernet interface (Wire Speed 100M) and 4 expansion interface.
Overview
Features
● The E1 interface complies with the G.703 recommendation, utilizing fully digital clock recovery and smooth phase-locked loop techniques;
● Voice port supports FXO/FXS, EM2/4 audio, and Magnet Telephone Interface. The FXO port is connected to the PBX, while the FXS port is connected to the user’s telephone set;
● Voice FXO/FXS port supports caller ID display, reverse polarity charging, and fax function
● The telephone interface supports the mutual dialing functionality between two sites;
● It provides 4 extended interfaces, which can be used to expand 1-4 channels of asynchronous data transmission, such as RS232/RS485/RS422/TTL, or 1-8 channels of dry contact signals;
● Ethernet interface supports 10/100M, half/full duplex auto-adaptable, support VLAN;
● The 4 Ethernet interfaces can be used as switching ports and support VLAN partition. They can also be configured as 4 logical channels for network isolation;
● Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable);
● The telephone interface is equipped with lightning protection that meets the GB/T17626.5 (IEC61000-4-5) standard for short-circuit current wave of 10/700μs and can withstand a peak output voltage of 6KV under open circuit conditions.
● The transmission distance is up to 2-120Km without interruption;
● AC 220V, DC-48V, DC24V can be optional.
Parameters
● Fiber
Multi-mode Fiber
50/125um, 62.5/125um,
Maximum transmission distance: 5Km @ 62.5/125um single mode fiber, attenuation (3dbm/km)
Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
Link budget: 16dBm
Single-mode Fiber
8/125um, 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9/125um single mode fiber, attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
Link budget: 18dBm
● E1 Interface
Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Line Coding: HDB3;
E1 Impedance: 75Ω (unbalance), 120Ω (balance);
Jitter Performance: In accord with protocol G.742 and G.823
Input Attenuation: 0~6dBm
● Ethernet Interface(10/100M)
Interface rate: 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Table Capacity: 4096
Connector: RJ45, support Auto-MDIX
● FXS Phone Port
Ring voltage: 75V
Ring frequency: 25HZ
2-wire Impedance: 600 Ohm (off-hook)
Return loss: 40 dB
● FXO Trunk Port
Ring detect voltage: 35V
Ring detection frequency: 17HZ-60HZ
2-wire Impedance: 600 Ohm (off-hook)
Return loss: 40 dB
● EM 2/4 Line
AD: 0dB
DA: -3.5dB
2/4-wire Impedance: 600 Ohm
Return loss: 20 dB
● Working Environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Specifications
| Model | FCP-O16E8F4R4/FCP-S16E8F4R4 |
| Function Description | 16 * telephone, 8E1, 4* FE Ethernet, Console or SNMP, Support 6U rackmount, One or Two Fiber interface, 4*RS232/422/485 |
| Power Supply |
Power supply: AC180V ~ 260V; DC –48V; DC +24V Power consumption: ≤10W |
| Dimension | Product Size: 485X138X45mm(WXDXH) 19 1U |
| Weight | 2.4KG |
Application
Related Products
Inquire Now
PRODUCT INQUIRY
Tell us about your application.
Share your devices, interfaces or quantity—our team will help you choose a suitable solution.
✓ Prompt response
↔ Technical guidance
✓ Confidential details
+ Custom requirements
We use your information only to respond to this inquiry.
